All MIBs › PCUBE-SE-MIB › pportAdminDuplex
pportAdminDuplex
Module: PCUBE-SE-MIB
OID (symbolic): PCUBE-SE-MIB::pportAdminDuplex
OID (numeric): 1.3.6.1.4.1.5655.4.1.10.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The desired duplex of the port.
What is pportAdminDuplex?
The configured (desired) duplex mode of the port — half, full, or auto. An admin sets this to match the far-end device's duplex setting; a mismatch here is a classic cause of collisions and poor throughput on the link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.10.1.1.7 snmpwalk -v2c -c public <target> PCUBE-SE-MIB::pportAdminDuplex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.10.1.1.7.1 snmpget -v2c -c public <target> PCUBE-SE-MIB::pportAdminDuplex.1
Start monitoring Cisco SCE2000/SE100 Service Control Engine platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PCUBE-SE-MIB::pportAdminDuplex OID value, configure state conditions and alerts, and monitor any Cisco SCE2000/SE100 Service Control Engine platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5655 | pcube | PCUBE-SMI |
| 1.3.6.1.4.1.5655.4 | pcubeWorkgroup | PCUBE-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5655.4.1 | pcubeSEObjs | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10 | pportGrp | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10.1 | pportTable | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10.1.1 | pportEntry | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.10.1.1.7 | pportAdminDuplex | PCUBE-SE-MIB |