All MIBs › PCUBE-SE-MIB › pchassisTempAlarm
pchassisTempAlarm
Module: PCUBE-SE-MIB
OID (symbolic): PCUBE-SE-MIB::pchassisTempAlarm
OID (numeric): 1.3.6.1.4.1.5655.4.1.2.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The chassis temperature alarm status.
What is pchassisTempAlarm?
Indicates whether chassis temperature is within the normal operating range (off) or too high (on). An admin watching this alarm fire would check airflow, fan status, and ambient room temperature before the device throttles or shuts down to protect itself.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.2.4 snmpwalk -v2c -c public <target> PCUBE-SE-MIB::pchassisTempAlarm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.2.4.1 snmpget -v2c -c public <target> PCUBE-SE-MIB::pchassisTempAlarm.1
Start monitoring Cisco SCE2000/SE100 Service Control Engine platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PCUBE-SE-MIB::pchassisTempAlarm OID value, configure state conditions and alerts, and monitor any Cisco SCE2000/SE100 Service Control Engine platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5655 | pcube | PCUBE-SMI |
| 1.3.6.1.4.1.5655.4 | pcubeWorkgroup | PCUBE-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5655.4.1 | pcubeSEObjs | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.2 | pchassisGrp | PCUBE-SE-MIB |
| 1.3.6.1.4.1.5655.4.1.2.4 | pchassisTempAlarm | PCUBE-SE-MIB |