PCUBE-SE-MIB :: linkStatusReflectionEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PCUBE-SE-MIB › linkStatusReflectionEnable

linkStatusReflectionEnable

Module: PCUBE-SE-MIB

OID (symbolic): PCUBE-SE-MIB::linkStatusReflectionEnable

OID (numeric): 1.3.6.1.4.1.5655.4.1.4.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Indicates if failure of the physical link on one i/f should trigger the failure of the link on the other i/f.

What is linkStatusReflectionEnable?

Indicates whether a physical link-down event on one interface of this link should be reflected as a forced link-down on the other interface. An admin enables this so that, for example, a subscriber-side cable unplug is immediately propagated to the network-side interface too, rather than leaving one side silently up.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.4.1.1.6
snmpwalk -v2c -c public <target> PCUBE-SE-MIB::linkStatusReflectionEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5655.4.1.4.1.1.6.1
snmpget -v2c -c public <target> PCUBE-SE-MIB::linkStatusReflectionEnable.1

Start monitoring Cisco SCE2000/SE100 Service Control Engine platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PCUBE-SE-MIB::linkStatusReflectionEnable OID value, configure state conditions and alerts, and monitor any Cisco SCE2000/SE100 Service Control Engine platforms from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5655pcubePCUBE-SMI
1.3.6.1.4.1.5655.4pcubeWorkgroupPCUBE-SMI
Numeric OIDNameModule
1.3.6.1.4.1.5655.4.1pcubeSEObjsPCUBE-SE-MIB
1.3.6.1.4.1.5655.4.1.4linkGrpPCUBE-SE-MIB
1.3.6.1.4.1.5655.4.1.4.1linkTablePCUBE-SE-MIB
1.3.6.1.4.1.5655.4.1.4.1.1linkEntryPCUBE-SE-MIB
1.3.6.1.4.1.5655.4.1.4.1.1.6linkStatusReflectionEnablePCUBE-SE-MIB