All MIBs › PANDATEL-FX-MODEM-MIB › mdmInterfaceAlarmCondition
mdmInterfaceAlarmCondition
Module: PANDATEL-FX-MODEM-MIB
OID (symbolic): PANDATEL-FX-MODEM-MIB::mdmInterfaceAlarmCondition
OID (numeric): 1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.98
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The alarm trigger mode at interface port: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e. an alarm is triggered if the laser diode is defective, or 'no-link-signal-or-laser-fail', i.e. the link is down or the laser diode is defective.
What is mdmInterfaceAlarmCondition?
This configures which conditions, no link signal, laser failure, or either, will trigger an alarm on the modem's interface port. Admins tune this to control how sensitively the modem reports interface-side problems, choosing whether to be alerted on link loss, laser failure, or both. An admin wanting alerts for any interface-side problem would set mdmInterfaceAlarmCondition to no-link-signal-or-laser-fail(5) rather than monitoring just one failure type.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.98 snmpwalk -v2c -c public <target> PANDATEL-FX-MODEM-MIB::mdmInterfaceAlarmCondition
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.98.1 snmpget -v2c -c public <target> PANDATEL-FX-MODEM-MIB::mdmInterfaceAlarmCondition.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.98.1 i <value>
Start monitoring Pandatel FX series fiber extender modem with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PANDATEL-FX-MODEM-MIB::mdmInterfaceAlarmCondition OID value, configure state conditions and alerts, and monitor any Pandatel FX series fiber extender modem from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.760 | pandatel | PANDATEL-AGENT-MIB |
| 1.3.6.1.4.1.760.1 | mibs | PANDATEL-AGENT-MIB |
| 1.3.6.1.4.1.760.1.1 | products | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2 | wan_products | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1 | mdm_mgmt | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10 | mdmSpecifics | PANDATEL-MODEM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.760.1.1.2.1.10.502 | fx | PANDATEL-FX-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.502.1 | fxModemTable | PANDATEL-FX-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.502.1.1 | fxTableEntry | PANDATEL-FX-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.98 | mdmInterfaceAlarmCondition | PANDATEL-FX-MODEM-MIB |