All MIBs › PANDATEL-FHFLF-MODEM-MIB › mdmLocalCarrierDetect
mdmLocalCarrierDetect
Module: PANDATEL-FHFLF-MODEM-MIB
OID (symbolic): PANDATEL-FHFLF-MODEM-MIB::mdmLocalCarrierDetect
OID (numeric): 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.60
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The data carrier detect mode at the interface: if set to 'fo-link-and-remote-handshake' the DCD signal (resp. I for X.21, etc.) follows link status and remote RTS (resp. C for X.21, etc.), if set to 'fo-link' the DCD signal follows link status only.
What is mdmLocalCarrierDetect?
This read-write enumerated value configures how the modem drives its local Data Carrier Detect signal, or equivalent such as the X.21 'I' lead, toward the attached DTE. Choosing fo-link-and-remote-handshake makes DCD reflect both fiber link status and the remote end's RTS/C signal, giving the attached router a fuller picture of end-to-end readiness, whereas fo-link only reflects the local fiber's up/down state. For example, an admin troubleshooting a router that won't bring up its serial interface might switch mdmLocalCarrierDetect to fo-link(3) to rule out the remote handshake state as the cause of DCD staying low.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.60 snmpwalk -v2c -c public <target> PANDATEL-FHFLF-MODEM-MIB::mdmLocalCarrierDetect
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.60.1 snmpget -v2c -c public <target> PANDATEL-FHFLF-MODEM-MIB::mdmLocalCarrierDetect.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.60.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mdmLocalCarrierDetect.1
Start monitoring Pandatel FHFLF fiber-to-copper modem/converter with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PANDATEL-FHFLF-MODEM-MIB::mdmLocalCarrierDetect OID value, configure state conditions and alerts, and monitor any Pandatel FHFLF fiber-to-copper modem/converter from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.760 | pandatel | PANDATEL-AGENT-MIB |
| 1.3.6.1.4.1.760.1 | mibs | PANDATEL-AGENT-MIB |
| 1.3.6.1.4.1.760.1.1 | products | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2 | wan_products | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1 | mdm_mgmt | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10 | mdmSpecifics | PANDATEL-MODEM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.760.1.1.2.1.10.102 | fhflf | PANDATEL-FHFLF-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.102.1 | fhflfModemTable | PANDATEL-FHFLF-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1 | fhflfTableEntry | PANDATEL-FHFLF-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.60 | mdmLocalCarrierDetect | PANDATEL-FHFLF-MODEM-MIB |