All MIBs › PANDATEL-FHFLF-MODEM-MIB › mdmDataRate
mdmDataRate
Module: PANDATEL-FHFLF-MODEM-MIB
OID (symbolic): PANDATEL-FHFLF-MODEM-MIB::mdmDataRate
OID (numeric): 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The data rate at the interface in bits per seconds. The data rate at the remote counterpart changes simultaneously. A data rate of 2.048 Mbps (E1) automatically disables CRC4, sets mdmStartTimeslot to 'unframed', enables time slot 16. A data rate of 1.984 Mbps (E1) automatically sets mdmStartTimeslot to 'timeslot-1', enables time slot 16. A data rate of 1.544 Mbps (T1) automatically sets mdmStartTimeslot to 'unframed'.
What is mdmDataRate?
This read-write value configures the interface's line data rate in bits per second, and automatically changing it also updates related framing settings such as mdmStartTimeslot, CRC4 generation, and time slot 16 on both ends of the link. Admins set this to match the required E1, 2.048 Mbps, or T1-derived rate, 1.984 or 1.544 Mbps, for the circuit, and must be aware the change cascades to the remote modem and to dependent framing parameters automatically. For example, setting mdmDataRate to 2.048 Mbps automatically disables CRC4 generation, sets the start time slot to unframed, and enables time slot 16, so the admin doesn't need to configure those separately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.25 snmpwalk -v2c -c public <target> PANDATEL-FHFLF-MODEM-MIB::mdmDataRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.25.1 snmpget -v2c -c public <target> PANDATEL-FHFLF-MODEM-MIB::mdmDataRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.25.1 i <value>
Start monitoring Pandatel FHFLF fiber-to-copper modem/converter with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PANDATEL-FHFLF-MODEM-MIB::mdmDataRate OID value, configure state conditions and alerts, and monitor any Pandatel FHFLF fiber-to-copper modem/converter from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.760 | pandatel | PANDATEL-AGENT-MIB |
| 1.3.6.1.4.1.760.1 | mibs | PANDATEL-AGENT-MIB |
| 1.3.6.1.4.1.760.1.1 | products | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2 | wan_products | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1 | mdm_mgmt | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10 | mdmSpecifics | PANDATEL-MODEM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.760.1.1.2.1.10.102 | fhflf | PANDATEL-FHFLF-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.102.1 | fhflfModemTable | PANDATEL-FHFLF-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1 | fhflfTableEntry | PANDATEL-FHFLF-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.102.1.1.25 | mdmDataRate | PANDATEL-FHFLF-MODEM-MIB |