All MIBs › Olicom-crossfireAtmSwitch-MIB › ifTestType
ifTestType
Module: Olicom-crossfireAtmSwitch-MIB
OID (symbolic): Olicom-crossfireAtmSwitch-MIB::ifTestType
OID (numeric): 1.3.6.1.4.1.285.2.6.2.24.1.3.1.3
Node type: OBJECT-TYPE
Type: OBJECT IDENTIFIER
Access: read-write
Description: A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full- duplex loopback test, and defines the special meanings of the subject identifier:
noTest OBJECT IDENTIFIER ::= { 0 0 }
When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated.
When read, this object always returns the most recent value that ifTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.285.2.6.2.24.1.3.1.3 snmpwalk -v2c -c public <target> Olicom-crossfireAtmSwitch-MIB::ifTestType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.285.2.6.2.24.1.3.1.3.1 snmpget -v2c -c public <target> Olicom-crossfireAtmSwitch-MIB::ifTestType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.285.2.6.2.24.1.3.1.3.1 s <value>
Start monitoring Olicom CrossFire ATM switch platform (module hardware inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Olicom-crossfireAtmSwitch-MIB::ifTestType OID value, configure state conditions and alerts, and monitor any Olicom CrossFire ATM switch platform (module hardware inventory) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.285 | olicom | Olicom-crossfireAtmSwitch-MIB |
| 1.3.6.1.4.1.285.2 | ocmibs | Olicom-crossfireAtmSwitch-MIB |
| 1.3.6.1.4.1.285.2.6 | ocmibsCrossfireAtmMIB | Olicom-crossfireAtmSwitch-MIB |
| 1.3.6.1.4.1.285.2.6.2 | crossfireAtmConfiguration | Olicom-crossfireAtmSwitch-MIB |
| 1.3.6.1.4.1.285.2.6.2.24 | configOam | Olicom-crossfireAtmSwitch-MIB |
| 1.3.6.1.4.1.285.2.6.2.24.1 | ifMIBObjects | Olicom-crossfireAtmSwitch-MIB |
| 1.3.6.1.4.1.285.2.6.2.24.1.3 | ifTestTable | Olicom-crossfireAtmSwitch-MIB |
| 1.3.6.1.4.1.285.2.6.2.24.1.3.1 | ifTestEntry | Olicom-crossfireAtmSwitch-MIB |
| 1.3.6.1.4.1.285.2.6.2.24.1.3.1.3 | ifTestType | Olicom-crossfireAtmSwitch-MIB |