All MIBs › Olicom-MIB › sCallbackEnable
sCallbackEnable
Module: Olicom-MIB
OID (symbolic): Olicom-MIB::sCallbackEnable
OID (numeric): 1.3.6.1.4.1.285.4.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls whether the Olicom Out-Of-Band Management Callback sub-system should be active (enabled) or not.
What is sCallbackEnable?
This enables or disables the Olicom Out-of-Band Management callback subsystem, which calls a management station back on a configured phone number rather than accepting an inbound modem connection directly. An admin enables this as a security measure so OBM access only proceeds after dialing a known, pre-configured number.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.285.4.18 snmpwalk -v2c -c public <target> Olicom-MIB::sCallbackEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.285.4.18.1 snmpget -v2c -c public <target> Olicom-MIB::sCallbackEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.285.4.18.1 i <value>
Start monitoring Legacy Olicom A/S networking equipment (hardware/software inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Olicom-MIB::sCallbackEnable OID value, configure state conditions and alerts, and monitor any Legacy Olicom A/S networking equipment (hardware/software inventory) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.285 | olicom | Olicom-crossfireAtmSwitch-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.285.4 | inet | Olicom-MIB |
| 1.3.6.1.4.1.285.4.18 | sCallbackEnable | Olicom-MIB |