All MIBs › Olicom-MIB › obmDialType
obmDialType
Module: Olicom-MIB
OID (symbolic): Olicom-MIB::obmDialType
OID (numeric): 1.3.6.1.4.1.285.6.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls if ATDP or ATDT will be sent to a modem while dialing from the Out-of-Band Management system.
What is obmDialType?
This selects whether the device sends pulse (ATDP) or tone (ATDT, the default) dialing commands to a modem when the OBM subsystem dials out. An admin only needs to change this from tone if the phone line at the site is pulse-only.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.285.6.19 snmpwalk -v2c -c public <target> Olicom-MIB::obmDialType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.285.6.19.1 snmpget -v2c -c public <target> Olicom-MIB::obmDialType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.285.6.19.1 i <value>
Start monitoring Legacy Olicom A/S networking equipment (hardware/software inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Olicom-MIB::obmDialType OID value, configure state conditions and alerts, and monitor any Legacy Olicom A/S networking equipment (hardware/software inventory) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.285 | olicom | Olicom-crossfireAtmSwitch-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.285.6 | obm | Olicom-MIB |
| 1.3.6.1.4.1.285.6.19 | obmDialType | Olicom-MIB |