All MIBs › Olicom-MIB › inetTrapEventDisableMask
inetTrapEventDisableMask
Module: Olicom-MIB
OID (symbolic): Olicom-MIB::inetTrapEventDisableMask
OID (numeric): 1.3.6.1.4.1.285.4.7.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: NOTE: This field has been replaced by the controlTrapTable. Bitmask of disabled traps from product-specific network management agents. Each octet within the value of this object specifies a set of eight traps, with the first octet specifying traps 1 through 8, the second octet specifying traps 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered trap, and the most significant bit represents the highest numbered trap. Thus, each trap of the device is represented by a single bit within the value of this object. If that bit has a value of `0' then that trap is included in the set of traps; the trap is not included if its bit has a value of `1'. The bits corresponds to the TRAP numbers found in the the product specific MIBs.
What is inetTrapEventDisableMask?
NOTE: this field has been superseded by the controlTrapTable and is largely legacy. It was a bitmask where each bit disabled one specific numbered trap defined in the various Olicom product-specific MIBs (Bridge, CAM, EHUB, CAU, etc.), with a 0 bit meaning the trap is still sent and a 1 bit meaning it's suppressed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.285.4.7.1.3 snmpwalk -v2c -c public <target> Olicom-MIB::inetTrapEventDisableMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.285.4.7.1.3.1 snmpget -v2c -c public <target> Olicom-MIB::inetTrapEventDisableMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.285.4.7.1.3.1 s <value>
Start monitoring Legacy Olicom A/S networking equipment (hardware/software inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Olicom-MIB::inetTrapEventDisableMask OID value, configure state conditions and alerts, and monitor any Legacy Olicom A/S networking equipment (hardware/software inventory) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.285 | olicom | Olicom-crossfireAtmSwitch-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.285.4 | inet | Olicom-MIB |
| 1.3.6.1.4.1.285.4.7 | inetTrapTable | Olicom-MIB |
| 1.3.6.1.4.1.285.4.7.1 | inetTrapTableEntry | Olicom-MIB |
| 1.3.6.1.4.1.285.4.7.1.3 | inetTrapEventDisableMask | Olicom-MIB |