All MIBs › Olicom-MIB › inetIPAddressEnableRIP
inetIPAddressEnableRIP
Module: Olicom-MIB
OID (symbolic): Olicom-MIB::inetIPAddressEnableRIP
OID (numeric): 1.3.6.1.4.1.285.4.10.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable control whether the device will process RIP (Routing Information Protocol) packets on UDP port 520 on the specified interface to update the IP routing table. The device will not announce any routes, it will only participate as a passive host. Refer to Unix documentation of either routed or gated daemons, or Internet RFC document 1058. This object has effect only if inetEnableRIP has the value 'enabled'.
What is inetIPAddressEnableRIP?
This controls whether the device passively listens for RIP updates specifically on this interface; it only has effect if the device-wide inetEnableRIP object is also set to enabled. As with rwho, an admin enables RIP listening globally first and then can restrict it to particular interfaces here.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.285.4.10.1.6 snmpwalk -v2c -c public <target> Olicom-MIB::inetIPAddressEnableRIP
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.285.4.10.1.6.1 snmpget -v2c -c public <target> Olicom-MIB::inetIPAddressEnableRIP.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.285.4.10.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> inetIPAddressEnableRIP.1
Start monitoring Legacy Olicom A/S networking equipment (hardware/software inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Olicom-MIB::inetIPAddressEnableRIP OID value, configure state conditions and alerts, and monitor any Legacy Olicom A/S networking equipment (hardware/software inventory) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.285 | olicom | Olicom-crossfireAtmSwitch-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.285.4 | inet | Olicom-MIB |
| 1.3.6.1.4.1.285.4.10 | inetIPAddressTable | Olicom-MIB |
| 1.3.6.1.4.1.285.4.10.1 | inetIPAddressEntry | Olicom-MIB |
| 1.3.6.1.4.1.285.4.10.1.6 | inetIPAddressEnableRIP | Olicom-MIB |