Olicom-MIB :: errorlogStoredSeverityLevel

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Olicom-MIB › errorlogStoredSeverityLevel

errorlogStoredSeverityLevel

Module: Olicom-MIB

OID (symbolic): Olicom-MIB::errorlogStoredSeverityLevel

OID (numeric): 1.3.6.1.4.1.285.10.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable contains the severity level determining which error logs will be written to permanent storage. Any error log with severity higher than or equal to this severity level will be stored for retrieval, even after a reset

What is errorlogStoredSeverityLevel?

This sets the minimum severity level at which an error log entry gets written to permanent storage and thus survives a device reset; entries below this level are only kept in volatile memory. An admin raises this threshold to reduce flash wear from routine informational logging, or lowers it when actively chasing an intermittent low-severity issue.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.285.10.8
snmpwalk -v2c -c public <target> Olicom-MIB::errorlogStoredSeverityLevel

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.285.10.8.1
snmpget -v2c -c public <target> Olicom-MIB::errorlogStoredSeverityLevel.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.285.10.8.1 i <value>

Start monitoring Legacy Olicom A/S networking equipment (hardware/software inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Olicom-MIB::errorlogStoredSeverityLevel OID value, configure state conditions and alerts, and monitor any Legacy Olicom A/S networking equipment (hardware/software inventory) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.285olicomOlicom-crossfireAtmSwitch-MIB
Numeric OIDNameModule
1.3.6.1.4.1.285.10errorlogOlicom-MIB
1.3.6.1.4.1.285.10.8errorlogStoredSeverityLevelOlicom-MIB