All MIBs › Olicom-MIB › controlEnableRmon
controlEnableRmon
Module: Olicom-MIB
OID (symbolic): Olicom-MIB::controlEnableRmon
OID (numeric): 1.3.6.1.4.1.285.5.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies whether RMON probe is enabled or disabled. If the device does not support RMON only disabled is allowed. Setting this variable resets the CAU.
What is controlEnableRmon?
This enables or disables the RMON probe functionality on devices that support it; on devices without RMON support, only disabled is a valid setting. Setting this variable also resets the CAU (Controlled Access Unit), so an admin should expect a brief service interruption when toggling it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.285.5.11 snmpwalk -v2c -c public <target> Olicom-MIB::controlEnableRmon
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.285.5.11.1 snmpget -v2c -c public <target> Olicom-MIB::controlEnableRmon.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.285.5.11.1 i <value>
Start monitoring Legacy Olicom A/S networking equipment (hardware/software inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Olicom-MIB::controlEnableRmon OID value, configure state conditions and alerts, and monitor any Legacy Olicom A/S networking equipment (hardware/software inventory) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.285 | olicom | Olicom-crossfireAtmSwitch-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.285.5 | control | Olicom-MIB |
| 1.3.6.1.4.1.285.5.11 | controlEnableRmon | Olicom-MIB |