All MIBs › OSPFV3-MIB › ospfv3ExtAreaLsdbLimit
ospfv3ExtAreaLsdbLimit
Module: OSPFV3-MIB
OID (symbolic): OSPFV3-MIB::ospfv3ExtAreaLsdbLimit
OID (numeric): 1.3.6.1.2.1.191.1.1.11
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The maximum number of non-default AS-external-LSA entries that can be stored in the link state database. If the value is -1, then there is no limit.
When the number of non-default AS-external-LSAs in a router's link state database reaches ospfv3ExtAreaLsdbLimit, the router enters Overflow state. The router never holds more than ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs in its database. ospfv3ExtAreaLsdbLimit MUST be set identically in all routers attached to the OSPFv3 backbone and/or any regular OSPFv3 area (i.e., OSPFv3 stub areas and not-so-stubby-areas (NSSAs) are excluded).
This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
What is ospfv3ExtAreaLsdbLimit?
The maximum number of non-default AS-External LSAs this router will hold before entering database Overflow state (a protective mode that stops originating more external routes); -1 means unlimited. This value must match across every router in the backbone and any regular area, and is commonly used to protect low-memory routers from an external-route flood.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.191.1.1.11 snmpwalk -v2c -c public <target> OSPFV3-MIB::ospfv3ExtAreaLsdbLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.191.1.1.11.1 snmpget -v2c -c public <target> OSPFV3-MIB::ospfv3ExtAreaLsdbLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.191.1.1.11.1 i <value>
Start monitoring vendor-neutral, standards-based MIB (OSPFv3 routing protocol, RFC 5643) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OSPFV3-MIB::ospfv3ExtAreaLsdbLimit OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (OSPFv3 routing protocol, RFC 5643) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.191 | ospfv3MIB | OSPFV3-MIB |
| 1.3.6.1.2.1.191.1 | ospfv3Objects | OSPFV3-MIB |
| 1.3.6.1.2.1.191.1.1 | ospfv3GeneralGroup | OSPFV3-MIB |
| 1.3.6.1.2.1.191.1.1.11 | ospfv3ExtAreaLsdbLimit | OSPFV3-MIB |