All MIBs › OPL-SP-MIB › scfIoBoxSensorValue
scfIoBoxSensorValue
Module: OPL-SP-MIB
OID (symbolic): OPL-SP-MIB::scfIoBoxSensorValue
OID (numeric): 1.3.6.1.4.1.211.1.15.3.1.1.11.10.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The value read from the environmental sensor.
This object can be compared with the Sensor Minimum Alarm and Maximum Alarm objects in this table to determine the value status. In addition, the Enabled Alarm should be used to determine what this value can be compared against, MinAlarm, MaxAlarm, or both.
If a value has exceeded the Minimum or Maximum, then the user will be notified through a change in the I/O Box component LED or temperature event trap. Through the comparisions described here, further information can be gathered as to the cause.
What is scfIoBoxSensorValue?
Reports the current reading from this I/O Box environmental sensor; comparing it against scfIoBoxSensorMinAlarm/scfIoBoxSensorMaxAlarm (as indicated by which thresholds scfIoBoxSensorEnabledAlarms says apply) determines the value's alarm status, and an out-of-range value is also surfaced via a component LED change or a temperature event trap. An admin polls this for real-time environmental monitoring and cross-references it with the alarm threshold objects when investigating an I/O Box LED or trap event.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.211.1.15.3.1.1.11.10.1.7 snmpwalk -v2c -c public <target> OPL-SP-MIB::scfIoBoxSensorValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.211.1.15.3.1.1.11.10.1.7.1 snmpget -v2c -c public <target> OPL-SP-MIB::scfIoBoxSensorValue.1
Start monitoring Sun/Fujitsu SPARC Enterprise (M-series) server (service processor status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OPL-SP-MIB::scfIoBoxSensorValue OID value, configure state conditions and alerts, and monitor any Sun/Fujitsu SPARC Enterprise (M-series) server (service processor status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.211 | fujitsu | Alert-Definition-Originator-MIB |
| 1.3.6.1.4.1.211.1 | product | CFAB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.211.1.15 | solaris | OPL-SP-MIB |
| 1.3.6.1.4.1.211.1.15.3 | sparcEnterprise | OPL-SP-MIB |
| 1.3.6.1.4.1.211.1.15.3.1 | oplSpMIB | OPL-SP-MIB |
| 1.3.6.1.4.1.211.1.15.3.1.1 | scfObjects | OPL-SP-MIB |
| 1.3.6.1.4.1.211.1.15.3.1.1.11 | scfIoBoxInfo | OPL-SP-MIB |
| 1.3.6.1.4.1.211.1.15.3.1.1.11.10 | scfIoBoxSensorTable | OPL-SP-MIB |
| 1.3.6.1.4.1.211.1.15.3.1.1.11.10.1 | scfIoBoxSensorEntry | OPL-SP-MIB |
| 1.3.6.1.4.1.211.1.15.3.1.1.11.10.1.7 | scfIoBoxSensorValue | OPL-SP-MIB |