OLD-CISCO-DECNET-MIB

All MIBs › OLD-CISCO-DECNET-MIB

Category: Legacy Cisco IOS

Description: Provides legacy Cisco IOS DECnet routing adjacency and circuit statistics from early Cisco IOS versions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OLD-CISCO-DECNET-MIB?

OLD-CISCO-DECNET-MIB is a legacy Cisco Systems proprietary MIB reporting DECnet routing statistics. Its objects cover forwarded/received packet counts, format/not-gateway/not-implemented error counts, Hello and bad-Hello counts, not-long/data/big-address/no-route/no-encapsulation counts, Level-1/bad-Level-1/too-many-hops counts, Hello-sent/Level-1-sent counts, no-memory/other-Hello/other-Level-1 counts, and Level-2/Level-2-sent/no-vector/other-Level-2 counts. As a performance/diagnostic MIB it lets an administrator watch DECnet routing traffic and error rates on a legacy Cisco router. It is deployed on legacy Cisco Systems network equipment (DECnet). Engineers can download the OLD-CISCO-DECNET-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OLD-CISCO-DECNET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Cisco Systems network equipment (DECnet)

Monitoring Examples

An administrator checks dnNoroute and dnBadhello to diagnose DECnet routing errors on a legacy Cisco router.

What Can Be Monitored

DECnet routing traffic and error statistics

Imported Objects

From CISCO-SMI

temporary

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1213-MIB

ifIndex

OIDs

OID symbolic	OID numeric	Type	Access	Description
tmpdecnet	1.3.6.1.4.1.9.3.1
INT dnForward	1.3.6.1.4.1.9.3.1.1	INTEGER	read-only	Total count of DECNET packets forwarded.
INT dnReceived	1.3.6.1.4.1.9.3.1.2	INTEGER	read-only	Count of total DECNET packets received.
INT dnFormaterr	1.3.6.1.4.1.9.3.1.3	INTEGER	read-only	Total number of DECNET packets received with header errors.
INT dnNotgateway	1.3.6.1.4.1.9.3.1.4	INTEGER	read-only	Total number of packets received while not routing.
INT dnNotimp	1.3.6.1.4.1.9.3.1.5	INTEGER	read-only	Total number of unknown control packets received.
INT dnHellos	1.3.6.1.4.1.9.3.1.6	INTEGER	read-only	Total number of Hellos received.
INT dnBadhello	1.3.6.1.4.1.9.3.1.7	INTEGER	read-only	Total number of received bad Hellos.
INT dnNotlong	1.3.6.1.4.1.9.3.1.8	INTEGER	read-only	Total number of received packets not in long format.
INT dnDatas	1.3.6.1.4.1.9.3.1.9	INTEGER	read-only	Total number of received data packets.
INT dnBigaddr	1.3.6.1.4.1.9.3.1.10	INTEGER	read-only	Total number of too large addresses.
INT dnNoroute	1.3.6.1.4.1.9.3.1.11	INTEGER	read-only	Total number of packets dropped due to no route present.
INT dnNoencap	1.3.6.1.4.1.9.3.1.12	INTEGER	read-only	Total number of packets dropped due to output encapsulation failure.
INT dnLevel1s	1.3.6.1.4.1.9.3.1.13	INTEGER	read-only	Total number of Level 1 routing packets received.
INT dnBadlevel1	1.3.6.1.4.1.9.3.1.14	INTEGER	read-only	Total number of bad Level 1 routing packets received.
INT dnToomanyhops	1.3.6.1.4.1.9.3.1.15	INTEGER	read-only	Total number of packets received which visited too many nodes.
INT dnHellosent	1.3.6.1.4.1.9.3.1.16	INTEGER	read-only	Total number of Hellos output.
INT dnLevel1sent	1.3.6.1.4.1.9.3.1.17	INTEGER	read-only	Total number of Level 1 routing packets sent.
INT dnNomemory	1.3.6.1.4.1.9.3.1.18	INTEGER	read-only	Total number of memory requests denied.
INT dnOtherhello	1.3.6.1.4.1.9.3.1.19	INTEGER	read-only	Total number of Hellos received from another area.
INT dnOtherlevel1	1.3.6.1.4.1.9.3.1.20	INTEGER	read-only	Total number of Level 1 routing packets received from another area.
INT dnLevel2s	1.3.6.1.4.1.9.3.1.21	INTEGER	read-only	Total number of Level 2 routing packets received.
INT dnLevel2sent	1.3.6.1.4.1.9.3.1.22	INTEGER	read-only	Total number of Level 2 routing packets sent.
INT dnNovector	1.3.6.1.4.1.9.3.1.23	INTEGER	read-only	Total number of missing routing vectors.
INT dnOtherlevel2	1.3.6.1.4.1.9.3.1.24	INTEGER	read-only	Total number of received Level 2 routing packets from another area.
INT dnNoaccess	1.3.6.1.4.1.9.3.1.25	INTEGER	read-only	Total number of packets dropped due to access control failure.
dnAreaTable	1.3.6.1.4.1.9.3.1.26		not-accessible	DECNET area routing table
dnAreaTableEntry	1.3.6.1.4.1.9.3.1.26.1		not-accessible	DECNET area routing table
INT dnArea	1.3.6.1.4.1.9.3.1.26.1.1	INTEGER	read-only	DECNet area from the area table.
INT dnACost	1.3.6.1.4.1.9.3.1.26.1.2	INTEGER	read-only	Cost of area in the area table.
INT dnAHop	1.3.6.1.4.1.9.3.1.26.1.3	INTEGER	read-only	Number of hops to area in the area table.
INT dnAIfIndex	1.3.6.1.4.1.9.3.1.26.1.4	INTEGER	read-only	Index of interface to the next hop address to the area. 0 denotes self.
OCT dnANextHop	1.3.6.1.4.1.9.3.1.26.1.5	OCTET STRING	read-only	Next hop DECNet address.
INT dnAAge	1.3.6.1.4.1.9.3.1.26.1.6	INTEGER	read-only	Age in seconds of area route.
INT dnAPrio	1.3.6.1.4.1.9.3.1.26.1.7	INTEGER	read-only	Priority of next hop router for area route.
dnHostTable	1.3.6.1.4.1.9.3.1.27		not-accessible	DECNET routing table
dnHostTableEntry	1.3.6.1.4.1.9.3.1.27.1		not-accessible	DECNET routing table
INT dnHost	1.3.6.1.4.1.9.3.1.27.1.1	INTEGER	read-only	DECNet node address from the routing table.
INT dnHCost	1.3.6.1.4.1.9.3.1.27.1.2	INTEGER	read-only	Cost of path to node in the routing table.
INT dnHHop	1.3.6.1.4.1.9.3.1.27.1.3	INTEGER	read-only	Number of hops to node in the routing table.
INT dnHIfIndex	1.3.6.1.4.1.9.3.1.27.1.4	INTEGER	read-only	Index of interface to the next hop address to the node. 0 denotes self.
OCT dnHNextHop	1.3.6.1.4.1.9.3.1.27.1.5	OCTET STRING	read-only	Next hop DECNet address.
INT dnHAge	1.3.6.1.4.1.9.3.1.27.1.6	INTEGER	read-only	Age in seconds of route to node.
INT dnHPrio	1.3.6.1.4.1.9.3.1.27.1.7	INTEGER	read-only	Priority of next hop router for node.
INT dnHIdx1	1.3.6.1.4.1.9.3.1.27.1.8	INTEGER	not-accessible	table index 1.
INT dnHIdx2	1.3.6.1.4.1.9.3.1.27.1.9	INTEGER	not-accessible	table index 2.
dnIfTable	1.3.6.1.4.1.9.3.1.28		not-accessible	DECNET interface table
dnIfTableEntry	1.3.6.1.4.1.9.3.1.28.1		not-accessible	DECNET interface table
INT dnIfCost	1.3.6.1.4.1.9.3.1.28.1.1	INTEGER	read-only	Cost of this interface.

RFC description

Legacy Cisco DECnet forwarding statistics and packet error tracking for DECnet protocol routing.

Start monitoring Legacy Cisco Systems router (DECnet routing statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OLD-CISCO-DECNET-MIB

What Is OLD-CISCO-DECNET-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description