All MIBs › OCCAM-MLT-MIB › mltTestIdentifier
mltTestIdentifier
Module: OCCAM-MLT-MIB
OID (symbolic): OCCAM-MLT-MIB::mltTestIdentifier
OID (numeric): 1.3.6.1.4.1.6066.2.1.1.3.1.1
Node type: OBJECT-TYPE
Type: MltTestIdentifier
Access: read-write
Description: Selects the mlt test to be run. Setting this value starts a test.
This is a required parameter.
Approximate expected test durations are as follows:
statusSuite 1 second mltSuite 1 minute activeModeVoltages 3 seconds highImpedanceModeVoltages 9 seconds dcResistance 18 seconds capacitance 18 seconds loopDetect 9 seconds loopLength 9 seconds.
What is mltTestIdentifier?
This read-write value selects which metallic line test to run on the line, and writing to it immediately starts that test - options include a quick statusSuite (about 1 second), the full mltSuite (about 1 minute), or narrower tests like dcResistance or loopLength (9-18 seconds each). A technician troubleshooting a subscriber's DSL line would set this to loopLength to estimate cable distance to a fault. Because tests take seconds to over a minute, poll mltLastTestStatus or wait for the completion notification rather than re-reading immediately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6066.2.1.1.3.1.1 snmpwalk -v2c -c public <target> OCCAM-MLT-MIB::mltTestIdentifier
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6066.2.1.1.3.1.1.1 snmpget -v2c -c public <target> OCCAM-MLT-MIB::mltTestIdentifier.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6066.2.1.1.3.1.1.1 s <value>
Start monitoring Occam Networks broadband access equipment (metallic line testing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OCCAM-MLT-MIB::mltTestIdentifier OID value, configure state conditions and alerts, and monitor any Occam Networks broadband access equipment (metallic line testing) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6066 | occam | OCCAM-REG-MODULE |
| 1.3.6.1.4.1.6066.2 | occamGeneric | OCCAM-REG-MODULE |
| 1.3.6.1.4.1.6066.2.1 | occamGenericModules | OCCAM-REG-MODULE |
| 1.3.6.1.4.1.6066.2.1.1 | occamGenericMonitorModules | OCCAM-REG-MODULE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6066.2.1.1.3 | occamMltMib | OCCAM-MLT-MIB |
| 1.3.6.1.4.1.6066.2.1.1.3.1 | mltTestConfig | OCCAM-MLT-MIB |
| 1.3.6.1.4.1.6066.2.1.1.3.1.1 | mltTestIdentifier | OCCAM-MLT-MIB |