All MIBs › OCCAM-MLT-MIB › mltTestCapacitanceCeqtr
mltTestCapacitanceCeqtr
Module: OCCAM-MLT-MIB
OID (symbolic): OCCAM-MLT-MIB::mltTestCapacitanceCeqtr
OID (numeric): 1.3.6.1.4.1.6066.2.1.1.3.3.2.1.20
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Capacitance measurements will support only single element (2 terminal) circuit. In the presence of a network of capacitance (figure 3), the individual capacitance will not be resolved. The equivalent capacitances CEQtr, CEQtg and CEQrg will be reported. They represent the following:
CEQtr = Ctr + Ctg/4 + Crg/4 CEQtg = Ctg + (Ctr*Crg)/(Ctr+Crg) CEQrg = Crg + (Ctr*Ctg)/Ctr+Ctg)
Capacitance measurements will not be available if fuse test fails or alarm is present. This test is intrusive and will be available in shutdown state only.
What is mltTestCapacitanceCeqtr?
Part of the full mlt suite, this read-only value in nF reports the equivalent tip-ring capacitance (CEQtr = Ctr + Ctg/4 + Crg/4) measured on the line, used as a rough indicator of cable length and wet-sectionalized faults. It won't be reported if the fuse test failed or an alarm was present, since the port is shut down to take this intrusive measurement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6066.2.1.1.3.3.2.1.20 snmpwalk -v2c -c public <target> OCCAM-MLT-MIB::mltTestCapacitanceCeqtr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6066.2.1.1.3.3.2.1.20.1 snmpget -v2c -c public <target> OCCAM-MLT-MIB::mltTestCapacitanceCeqtr.1
Start monitoring Occam Networks broadband access equipment (metallic line testing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OCCAM-MLT-MIB::mltTestCapacitanceCeqtr OID value, configure state conditions and alerts, and monitor any Occam Networks broadband access equipment (metallic line testing) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6066 | occam | OCCAM-REG-MODULE |
| 1.3.6.1.4.1.6066.2 | occamGeneric | OCCAM-REG-MODULE |
| 1.3.6.1.4.1.6066.2.1 | occamGenericModules | OCCAM-REG-MODULE |
| 1.3.6.1.4.1.6066.2.1.1 | occamGenericMonitorModules | OCCAM-REG-MODULE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6066.2.1.1.3 | occamMltMib | OCCAM-MLT-MIB |
| 1.3.6.1.4.1.6066.2.1.1.3.3 | mltTestResults | OCCAM-MLT-MIB |
| 1.3.6.1.4.1.6066.2.1.1.3.3.2 | mltTestResultsTable | OCCAM-MLT-MIB |
| 1.3.6.1.4.1.6066.2.1.1.3.3.2.1 | mltTestResultsEntry | OCCAM-MLT-MIB |
| 1.3.6.1.4.1.6066.2.1.1.3.3.2.1.20 | mltTestCapacitanceCeqtr | OCCAM-MLT-MIB |