All MIBs › Novell-Hub-Ethernet-MIB › rptrMonPortRunts
rptrMonPortRunts
Module: Novell-Hub-Ethernet-MIB
OID (symbolic): Novell-Hub-Ethernet-MIB::rptrMonPortRunts
OID (numeric): 1.3.6.1.4.1.23.2.2.2.2.1.10
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: Increment counter by one for each carrier event whose ActivityDuration is greater than ShortEventMaxTime and less than RuntMaxTime. RuntMaxTime is greater than 53.2uS and less than 56.0uS.
An event whose length is greater than 7.4uS but less than 8.2uS shall increment either the ShortEvent object or the runts object but not both.
A non-collision event greater than 53.2uS but less than 56.0uS may or may not be counted as a runt. A non-collision event greater than or equal to 56.0uS shall not be counted as a Runt. RuntMaxTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine.
Note: Runts do not indicate a problem in the network. The approximate minimum time for counter rollover is 16 hours.
What is rptrMonPortRunts?
This read-only Counter counts undersized frame fragments received on a port that are longer than a short event but shorter than a valid minimum frame. An admin generally doesn't treat a rising runts count as a network problem by itself, since runts are a normal side effect of collisions on shared Ethernet segments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23.2.2.2.2.1.10 snmpwalk -v2c -c public <target> Novell-Hub-Ethernet-MIB::rptrMonPortRunts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.23.2.2.2.2.1.10.1 snmpget -v2c -c public <target> Novell-Hub-Ethernet-MIB::rptrMonPortRunts.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rptrMonPortRunts.1
Start monitoring Novell-managed Ethernet hub, legacy shared-media hardware (port/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Novell-Hub-Ethernet-MIB::rptrMonPortRunts OID value, configure state conditions and alerts, and monitor any Novell-managed Ethernet hub, legacy shared-media hardware (port/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.23 | novell | GWADA-MIB |
| 1.3.6.1.4.1.23.2 | mibDoc | GWADA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.23.2.2 | nSnmpDot3RptrMgt | Novell-Hub-Ethernet-MIB |
| 1.3.6.1.4.1.23.2.2.2 | rptrMonitorGroup | Novell-Hub-Ethernet-MIB |
| 1.3.6.1.4.1.23.2.2.2.2 | nrptrMonitorPortTable | Novell-Hub-Ethernet-MIB |
| 1.3.6.1.4.1.23.2.2.2.2.1 | nrptrMonitorPortEntry | Novell-Hub-Ethernet-MIB |
| 1.3.6.1.4.1.23.2.2.2.2.1.10 | rptrMonPortRunts | Novell-Hub-Ethernet-MIB |