Nortel-MsCarrier-MscPassport-TdmaIwfMIB :: mscTdmaBcRlp1T3PeerAckTimer

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-TdmaIwfMIB › mscTdmaBcRlp1T3PeerAckTimer

mscTdmaBcRlp1T3PeerAckTimer

Module: Nortel-MsCarrier-MscPassport-TdmaIwfMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-TdmaIwfMIB::mscTdmaBcRlp1T3PeerAckTimer

OID (numeric): 1.3.6.1.4.1.562.36.2.1.136.7.10.1.5

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute indicates the current T2 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Information (XID). The attribute specifies the maximum time the receiving RLP1 entity shall wait for the peer to ACK or NAK data. The value used for XID negotiations can be provisioned in the TdmaCs/* Rlp1 t3PeerAckTimer attribute.

What is mscTdmaBcRlp1T3PeerAckTimer?

Reports the current T3 peer-acknowledgment timer value (5-20) negotiated during XID (Exchange Identification) for RLP1 on Service Access Points 0 and 1 of this active call -- the maximum time the receiving RLP1 entity waits for the peer to ACK or NAK data (note: the source MIB's own DESCRIPTION text for this object mislabels it as "the current T2 timer," but this explanation follows the object's actual name, T3PeerAckTimer, and its parallel with the T1/T2 siblings). This is the operational counterpart to the provisioned mscTdmaCsRlp1T3PeerAckTimer setting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.136.7.10.1.5
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-TdmaIwfMIB::mscTdmaBcRlp1T3PeerAckTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.136.7.10.1.5.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-TdmaIwfMIB::mscTdmaBcRlp1T3PeerAckTimer.1

Start monitoring Nortel MsCarrier MscPassport switch (TDMA mobile interworking function) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-TdmaIwfMIB::mscTdmaBcRlp1T3PeerAckTimer OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (TDMA mobile interworking function) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.136mscTdmaBcNortel-MsCarrier-MscPassport-TdmaIwfMIB
1.3.6.1.4.1.562.36.2.1.136.7mscTdmaBcRlp1Nortel-MsCarrier-MscPassport-TdmaIwfMIB
1.3.6.1.4.1.562.36.2.1.136.7.10mscTdmaBcRlp1OperTableNortel-MsCarrier-MscPassport-TdmaIwfMIB
1.3.6.1.4.1.562.36.2.1.136.7.10.1mscTdmaBcRlp1OperEntryNortel-MsCarrier-MscPassport-TdmaIwfMIB
1.3.6.1.4.1.562.36.2.1.136.7.10.1.5mscTdmaBcRlp1T3PeerAckTimerNortel-MsCarrier-MscPassport-TdmaIwfMIB