Nortel-MsCarrier-MscPassport-TdmaIwfMIB :: mscTdmaBcModemAutobaud

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-TdmaIwfMIB › mscTdmaBcModemAutobaud

mscTdmaBcModemAutobaud

Module: Nortel-MsCarrier-MscPassport-TdmaIwfMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-TdmaIwfMIB::mscTdmaBcModemAutobaud

OID (numeric): 1.3.6.1.4.1.562.36.2.1.136.3.10.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the DMS-MTX on the following: (1) the initial modem data rate value, and (2) whether a modem is allowed to perform autobauding (on) or not (off). With autobauding on, the modem is allowed to connect using a valid modem data rate less than or equal to the initial rate specified to the modem by the DMS-MTX. If a modem cannot perform autobauding and the carrier cannot be established at the initial data rate, the modem is disabled.

What is mscTdmaBcModemAutobaud?

Reports whether autobauding is active for this modem call: the DMS-MTX specifies an initial data rate and whether the modem is allowed to connect at a lower valid rate (autobaud on) if the initial rate can't be achieved, versus being disabled entirely if it can't connect at the initial rate and autobaud is off. Admins check this when a call connected at a lower-than-expected rate, since autobaud being on explains why a fallback rate was accepted rather than the call failing outright.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.136.3.10.1.10
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-TdmaIwfMIB::mscTdmaBcModemAutobaud

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.136.3.10.1.10.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-TdmaIwfMIB::mscTdmaBcModemAutobaud.1

Start monitoring Nortel MsCarrier MscPassport switch (TDMA mobile interworking function) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-TdmaIwfMIB::mscTdmaBcModemAutobaud OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (TDMA mobile interworking function) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.136mscTdmaBcNortel-MsCarrier-MscPassport-TdmaIwfMIB
1.3.6.1.4.1.562.36.2.1.136.3mscTdmaBcModemNortel-MsCarrier-MscPassport-TdmaIwfMIB
1.3.6.1.4.1.562.36.2.1.136.3.10mscTdmaBcModemOperTableNortel-MsCarrier-MscPassport-TdmaIwfMIB
1.3.6.1.4.1.562.36.2.1.136.3.10.1mscTdmaBcModemOperEntryNortel-MsCarrier-MscPassport-TdmaIwfMIB
1.3.6.1.4.1.562.36.2.1.136.3.10.1.10mscTdmaBcModemAutobaudNortel-MsCarrier-MscPassport-TdmaIwfMIB