All MIBs › Nortel-MsCarrier-MscPassport-PorsVcMIB › mscRtgPorsProfSetupPriority
mscRtgPorsProfSetupPriority
Module: Nortel-MsCarrier-MscPassport-PorsVcMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfSetupPriority
OID (numeric): 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS establishes a path through the network, it uses the setupPriority attribute to determine its potential for bumping established paths to acquire their bandwidth. The holdingPriority, a complementary attribute of this attribute, specifies the priority a path maintains once it is established. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.
What is mscRtgPorsProfSetupPriority?
Specifies the priority, 0 highest, 4 lowest, at which paths using this profile are established; a new path can bump an existing path if this setup priority is numerically better than that existing path's holding priority.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.3 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfSetupPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.3.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfSetupPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mscRtgPorsProfSetupPriority.1
Start monitoring Nortel Magellan/MsCarrier Passport switch (route-selection/path routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfSetupPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan/MsCarrier Passport switch (route-selection/path routing) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.40 | mscRtg | Nortel-MsCarrier-MscPassport-BaseRoutingMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.40.6 | mscRtgPors | Nortel-MsCarrier-MscPassport-PorsVcMIB |
| 1.3.6.1.4.1.562.36.2.1.40.6.7 | mscRtgPorsProf | Nortel-MsCarrier-MscPassport-PorsVcMIB |
| 1.3.6.1.4.1.562.36.2.1.40.6.7.11 | mscRtgPorsProfProvTable | Nortel-MsCarrier-MscPassport-PorsVcMIB |
| 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1 | mscRtgPorsProfProvEntry | Nortel-MsCarrier-MscPassport-PorsVcMIB |
| 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.3 | mscRtgPorsProfSetupPriority | Nortel-MsCarrier-MscPassport-PorsVcMIB |