Nortel-MsCarrier-MscPassport-PorsVcMIB :: mscRtgPorsProfPathFailureAction

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-MsCarrier-MscPassport-PorsVcMIBmscRtgPorsProfPathFailureAction

mscRtgPorsProfPathFailureAction

Module: Nortel-MsCarrier-MscPassport-PorsVcMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfPathFailureAction

OID (numeric): 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies whether the application can tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is chosen, the application is informed as soon as possible about a failure by disconnection. If the attribute is set to reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails the application is informed of the failure. With this option set to reRoutePath the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. Note that if PLC components are different at both ends only the calling end is allowed to reconnect.

What is mscRtgPorsProfPathFailureAction?

Specifies whether a path using this profile should be torn down immediately on failure, or attempt an immediate reroute first, the default, before giving up and disconnecting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.17
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfPathFailureAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.17.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfPathFailureAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.17.1 i <value>

Start monitoring Nortel Magellan/MsCarrier Passport switch (route-selection/path routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfPathFailureAction OID value, configure state conditions and alerts, and monitor any Nortel Magellan/MsCarrier Passport switch (route-selection/path routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.40mscRtgNortel-MsCarrier-MscPassport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.40.6mscRtgPorsNortel-MsCarrier-MscPassport-PorsVcMIB
1.3.6.1.4.1.562.36.2.1.40.6.7mscRtgPorsProfNortel-MsCarrier-MscPassport-PorsVcMIB
1.3.6.1.4.1.562.36.2.1.40.6.7.11mscRtgPorsProfProvTableNortel-MsCarrier-MscPassport-PorsVcMIB
1.3.6.1.4.1.562.36.2.1.40.6.7.11.1mscRtgPorsProfProvEntryNortel-MsCarrier-MscPassport-PorsVcMIB
1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.17mscRtgPorsProfPathFailureActionNortel-MsCarrier-MscPassport-PorsVcMIB