Nortel-MsCarrier-MscPassport-PorsVcMIB :: mscRtgPorsProfHoldingPriority

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-MsCarrier-MscPassport-PorsVcMIBmscRtgPorsProfHoldingPriority

mscRtgPorsProfHoldingPriority

Module: Nortel-MsCarrier-MscPassport-PorsVcMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfHoldingPriority

OID (numeric): 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the priority that a path holds once it is established. Zero is the highest priority and four is the lowest. A path's holdingPriority determines this path's likelihood of being bumped by a new path to acquire its bandwidth. The setupPriority, a complementary attribute, indicates the priority of a path at establishment time. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.

What is mscRtgPorsProfHoldingPriority?

Specifies the priority, 0 highest, 4 lowest, a path using this profile retains once established, determining how vulnerable it is to being bumped by a newer path with a better setup priority, the complementary attribute to mscRtgPorsProfSetupPriority.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.4
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfHoldingPriority

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.4.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfHoldingPriority.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.4.1 i <value>

Start monitoring Nortel Magellan/MsCarrier Passport switch (route-selection/path routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfHoldingPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan/MsCarrier Passport switch (route-selection/path routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.40mscRtgNortel-MsCarrier-MscPassport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.40.6mscRtgPorsNortel-MsCarrier-MscPassport-PorsVcMIB
1.3.6.1.4.1.562.36.2.1.40.6.7mscRtgPorsProfNortel-MsCarrier-MscPassport-PorsVcMIB
1.3.6.1.4.1.562.36.2.1.40.6.7.11mscRtgPorsProfProvTableNortel-MsCarrier-MscPassport-PorsVcMIB
1.3.6.1.4.1.562.36.2.1.40.6.7.11.1mscRtgPorsProfProvEntryNortel-MsCarrier-MscPassport-PorsVcMIB
1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.4mscRtgPorsProfHoldingPriorityNortel-MsCarrier-MscPassport-PorsVcMIB