All MIBs › Nortel-MsCarrier-MscPassport-PorsVcMIB › mscRtgPorsProfBumpPreference
mscRtgPorsProfBumpPreference
Module: Nortel-MsCarrier-MscPassport-PorsVcMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfBumpPreference
OID (numeric): 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies when bumping may be triggered as a result of this call being routed/rerouted or optimized. There are two possibilities: bumpWhenNecessary: means that this call will only trigger the bumping of another call (subject to setup/holding priority restrictions) when there is no other way to establish a route for this call. bumpToObtainBestRoute: means that this call may trigger the bumping of other calls (subject to setup/holding priority restrictions) if doing so would result in this call obtaining a better (lower cost/delay) route. Since bumping to obtain the best route can be somewhat intrusive the default is only to bump when there is no other way to route the call.
What is mscRtgPorsProfBumpPreference?
Specifies whether a call using this profile should only bump other calls when there's no other way to route it, the default, or should actively bump to obtain a better route even when a non-bumping route already exists.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.18 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfBumpPreference
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.18.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfBumpPreference.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.18.1 i <value>
Start monitoring Nortel Magellan/MsCarrier Passport switch (route-selection/path routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-PorsVcMIB::mscRtgPorsProfBumpPreference OID value, configure state conditions and alerts, and monitor any Nortel Magellan/MsCarrier Passport switch (route-selection/path routing) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.40 | mscRtg | Nortel-MsCarrier-MscPassport-BaseRoutingMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.40.6 | mscRtgPors | Nortel-MsCarrier-MscPassport-PorsVcMIB |
| 1.3.6.1.4.1.562.36.2.1.40.6.7 | mscRtgPorsProf | Nortel-MsCarrier-MscPassport-PorsVcMIB |
| 1.3.6.1.4.1.562.36.2.1.40.6.7.11 | mscRtgPorsProfProvTable | Nortel-MsCarrier-MscPassport-PorsVcMIB |
| 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1 | mscRtgPorsProfProvEntry | Nortel-MsCarrier-MscPassport-PorsVcMIB |
| 1.3.6.1.4.1.562.36.2.1.40.6.7.11.1.18 | mscRtgPorsProfBumpPreference | Nortel-MsCarrier-MscPassport-PorsVcMIB |