All MIBs › Nortel-MsCarrier-MscPassport-OamEthernetMIB › mscLpOamEnetTestType
mscLpOamEnetTestType
Module: Nortel-MsCarrier-MscPassport-OamEthernetMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-OamEthernetMIB::mscLpOamEnetTestType
OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.27.2.10.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute is the type of test to be run. The four types of tests available are: the port hardware logic test, the configure and dump memory registers test, the memory mapping test and the Time Domain Reflectometry (TDR) test.
The possible values of this attribute are: hardwareLogic: this test checks the port hardware controller for logic errors in some of the on-chip counters and shift registers.
configuration: this test configures the memory registers of the hardware controller in a predetermined way and then dumps the registers and checks their contents for errors.
memoryMap: this test does an extensive test of the memory structures used by the OAM Ethernet port to verify that they are configured correctly and are error-free.
tdr: this test is used to detect and locate cable faults caused by either a short or an open circuit on the coaxial cable.
What is mscLpOamEnetTestType?
Read-write choice of which diagnostic to run on this OAM Ethernet port: hardwareLogic(0) checks on-chip counters/registers for logic errors, configuration(1) writes then reads back memory registers to check for errors, memoryMap(2) exhaustively checks the port's internal memory structures, and tdr(3) runs Time Domain Reflectometry to locate a cable short or open.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.27.2.10.1.1 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-OamEthernetMIB::mscLpOamEnetTestType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.27.2.10.1.1.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-OamEthernetMIB::mscLpOamEnetTestType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.12.27.2.10.1.1.1 i <value>
Start monitoring Nortel MSC Passport switching platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-OamEthernetMIB::mscLpOamEnetTestType OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport switching platforms from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.12 | mscLp | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.27 | mscLpOamEnet | Nortel-MsCarrier-MscPassport-OamEthernetMIB |
| 1.3.6.1.4.1.562.36.2.1.12.27.2 | mscLpOamEnetTest | Nortel-MsCarrier-MscPassport-OamEthernetMIB |
| 1.3.6.1.4.1.562.36.2.1.12.27.2.10 | mscLpOamEnetTestOperTable | Nortel-MsCarrier-MscPassport-OamEthernetMIB |
| 1.3.6.1.4.1.562.36.2.1.12.27.2.10.1 | mscLpOamEnetTestOperEntry | Nortel-MsCarrier-MscPassport-OamEthernetMIB |
| 1.3.6.1.4.1.562.36.2.1.12.27.2.10.1.1 | mscLpOamEnetTestType | Nortel-MsCarrier-MscPassport-OamEthernetMIB |