Nortel-MsCarrier-MscPassport-OamEthernetMIB :: mscLpOamEnetSwitchoverOnFailure

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-OamEthernetMIB › mscLpOamEnetSwitchoverOnFailure

mscLpOamEnetSwitchoverOnFailure

Module: Nortel-MsCarrier-MscPassport-OamEthernetMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-OamEthernetMIB::mscLpOamEnetSwitchoverOnFailure

OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.27.12.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies if a CP switchover event should occur if a port or link failure is detected by the initial test process or if a steady state link failure is observed.

This attribute can be set to one of the following values: enabled: This value indicates that a switchover will take place if a port or link failure is detected.

disabled: This value indicates that a switchover will not take place if a port or link failure is detected.

What is mscLpOamEnetSwitchoverOnFailure?

Read-write setting (default enabled) controlling whether a CP (control processor) switchover is triggered when a port or link failure is detected on this OAM Ethernet port, either during initial testing or in steady-state operation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.27.12.1.3
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-OamEthernetMIB::mscLpOamEnetSwitchoverOnFailure

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.27.12.1.3.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-OamEthernetMIB::mscLpOamEnetSwitchoverOnFailure.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.12.27.12.1.3.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mscLpOamEnetSwitchoverOnFailure.1

Start monitoring Nortel MSC Passport switching platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-OamEthernetMIB::mscLpOamEnetSwitchoverOnFailure OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport switching platforms from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.12mscLpNortel-MsCarrier-MscPassport-LogicalProcessorMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.12.27mscLpOamEnetNortel-MsCarrier-MscPassport-OamEthernetMIB
1.3.6.1.4.1.562.36.2.1.12.27.12mscLpOamEnetProvTableNortel-MsCarrier-MscPassport-OamEthernetMIB
1.3.6.1.4.1.562.36.2.1.12.27.12.1mscLpOamEnetProvEntryNortel-MsCarrier-MscPassport-OamEthernetMIB
1.3.6.1.4.1.562.36.2.1.12.27.12.1.3mscLpOamEnetSwitchoverOnFailureNortel-MsCarrier-MscPassport-OamEthernetMIB