All MIBs › Nortel-MsCarrier-MscPassport-ImaMIB › mscLpImaProtocol
mscLpImaProtocol
Module: Nortel-MsCarrier-MscPassport-ImaMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-ImaMIB::mscLpImaProtocol
OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.22.10.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies what protocol the component should run. If atmForum10 is chosen, the ATM Forum's IMA protocol (version 1.0) will be used and signalled in outgoing IMA Control Protocol (ICP) cells. This protocol is specified in version 1.1 of the ATM Forum IMA specification. The IMA group will come up only if the far end IMA also uses the ATM Forum's IMA protocol. If proprietary is chosen, Nortel's proprietary IMA protocol will be used. The IMA group will come up only if the far end IMA also uses Nortel's proprietary IMA protocol. This IMA group will not inter-operate with IMA implementations from other vendors. Feature ima must be provisioned on the LP for this protocol to be used.
What is mscLpImaProtocol?
This selects which IMA control protocol the IMA group runs: atmForum10, the standard ATM Forum IMA 1.0 protocol (interoperable with other vendors), or proprietary, Nortel's own IMA implementation (interoperable only with other Nortel/Passport equipment and requiring the ima feature to be provisioned on the line processor). An admin must ensure both ends of the link agree on this setting, since the IMA group will simply fail to come up if the far end is using a different protocol.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.22.10.1.6 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-ImaMIB::mscLpImaProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.22.10.1.6.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-ImaMIB::mscLpImaProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.12.22.10.1.6.1 i <value>
Start monitoring Nortel MsCarrier Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-ImaMIB::mscLpImaProtocol OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switches from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.12 | mscLp | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.22 | mscLpIma | Nortel-MsCarrier-MscPassport-ImaMIB |
| 1.3.6.1.4.1.562.36.2.1.12.22.10 | mscLpImaProvTable | Nortel-MsCarrier-MscPassport-ImaMIB |
| 1.3.6.1.4.1.562.36.2.1.12.22.10.1 | mscLpImaProvEntry | Nortel-MsCarrier-MscPassport-ImaMIB |
| 1.3.6.1.4.1.562.36.2.1.12.22.10.1.6 | mscLpImaProtocol | Nortel-MsCarrier-MscPassport-ImaMIB |