All MIBs › Nortel-MsCarrier-MscPassport-ImaMIB › mscLpImaLkControlStatus
mscLpImaLkControlStatus
Module: Nortel-MsCarrier-MscPassport-ImaMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-ImaMIB::mscLpImaLkControlStatus
OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.22.3.13.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.
The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked.
The value suspended indicates that the service has been administratively suspended.
Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
What is mscLpImaLkControlStatus?
This is the OSI Control Status of this individual IMA link, covering the same administrative test/lock conditions (subjectToTest, partOfServicesLocked, reservedForTest, suspended) as the parent group's status object. An admin uses this to see whether one particular link's unavailability is due to an administrative test or suspension rather than a genuine fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.22.3.13.1.6 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-ImaMIB::mscLpImaLkControlStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.22.3.13.1.6.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-ImaMIB::mscLpImaLkControlStatus.1
Start monitoring Nortel MsCarrier Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-ImaMIB::mscLpImaLkControlStatus OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switches from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.12 | mscLp | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.22 | mscLpIma | Nortel-MsCarrier-MscPassport-ImaMIB |
| 1.3.6.1.4.1.562.36.2.1.12.22.3 | mscLpImaLk | Nortel-MsCarrier-MscPassport-ImaMIB |
| 1.3.6.1.4.1.562.36.2.1.12.22.3.13 | mscLpImaLkStateTable | Nortel-MsCarrier-MscPassport-ImaMIB |
| 1.3.6.1.4.1.562.36.2.1.12.22.3.13.1 | mscLpImaLkStateEntry | Nortel-MsCarrier-MscPassport-ImaMIB |
| 1.3.6.1.4.1.562.36.2.1.12.22.3.13.1.6 | mscLpImaLkControlStatus | Nortel-MsCarrier-MscPassport-ImaMIB |