Nortel-MsCarrier-MscPassport-ImaMIB :: mscLpDS3ImaTransmitClockMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-ImaMIB › mscLpDS3ImaTransmitClockMode

mscLpDS3ImaTransmitClockMode

Module: Nortel-MsCarrier-MscPassport-ImaMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-ImaMIB::mscLpDS3ImaTransmitClockMode

OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.5.7.10.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the transmit clocking mode. If itc (Independent Transmit Clock) is chosen, the physical ports used by the IMA group may have different clocking sources. If ctc (Common Transmit Clock) is chosen, it is recommended that the physical ports used by the IMA group have the same clocking source. However, if the physical ports have different clocking sources, the operator should ensure that all the clocking sources have the same rate.

What is mscLpDS3ImaTransmitClockMode?

This selects the DS3 IMA group's transmit clocking mode: itc (Independent Transmit Clock), allowing member ports to use different clock sources, or ctc (Common Transmit Clock), where ports are expected to share one clock source (or at least matching rates). An admin sets ctc deliberately when the far end requires synchronized clocking across links, and mismatches here show up later as mscLpDS3ImaClockingModeMismatch.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.5.7.10.1.5
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-ImaMIB::mscLpDS3ImaTransmitClockMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.5.7.10.1.5.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-ImaMIB::mscLpDS3ImaTransmitClockMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.12.5.7.10.1.5.1 i <value>

Start monitoring Nortel MsCarrier Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-ImaMIB::mscLpDS3ImaTransmitClockMode OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switches from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.12mscLpNortel-MsCarrier-MscPassport-LogicalProcessorMIB
1.3.6.1.4.1.562.36.2.1.12.5mscLpDS3Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.12.5.7mscLpDS3ImaNortel-MsCarrier-MscPassport-ImaMIB
1.3.6.1.4.1.562.36.2.1.12.5.7.10mscLpDS3ImaProvTableNortel-MsCarrier-MscPassport-ImaMIB
1.3.6.1.4.1.562.36.2.1.12.5.7.10.1mscLpDS3ImaProvEntryNortel-MsCarrier-MscPassport-ImaMIB
1.3.6.1.4.1.562.36.2.1.12.5.7.10.1.5mscLpDS3ImaTransmitClockModeNortel-MsCarrier-MscPassport-ImaMIB