Nortel-MsCarrier-MscPassport-ImaMIB :: mscLpDS3ImaTestDataStartDelay

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-ImaMIB › mscLpDS3ImaTestDataStartDelay

mscLpDS3ImaTestDataStartDelay

Module: Nortel-MsCarrier-MscPassport-ImaMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-ImaMIB::mscLpDS3ImaTestDataStartDelay

OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.5.7.2.11.1.6

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.

What is mscLpDS3ImaTestDataStartDelay?

This sets the delay, in seconds (0-1814400, default 0), between when a DS3 IMA test's loopback is expected to be set up and when test data actually starts transmitting; it's ignored for externalLoop tests. An admin increases this to accommodate non-standard remote equipment that needs extra time to establish the requested loopback before data starts flowing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.5.7.2.11.1.6
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-ImaMIB::mscLpDS3ImaTestDataStartDelay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.5.7.2.11.1.6.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-ImaMIB::mscLpDS3ImaTestDataStartDelay.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.12.5.7.2.11.1.6.1 i <value>

Start monitoring Nortel MsCarrier Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-ImaMIB::mscLpDS3ImaTestDataStartDelay OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switches from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.12mscLpNortel-MsCarrier-MscPassport-LogicalProcessorMIB
1.3.6.1.4.1.562.36.2.1.12.5mscLpDS3Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.12.5.7mscLpDS3ImaNortel-MsCarrier-MscPassport-ImaMIB
1.3.6.1.4.1.562.36.2.1.12.5.7.2mscLpDS3ImaTestNortel-MsCarrier-MscPassport-ImaMIB
1.3.6.1.4.1.562.36.2.1.12.5.7.2.11mscLpDS3ImaTestSetupTableNortel-MsCarrier-MscPassport-ImaMIB
1.3.6.1.4.1.562.36.2.1.12.5.7.2.11.1mscLpDS3ImaTestSetupEntryNortel-MsCarrier-MscPassport-ImaMIB
1.3.6.1.4.1.562.36.2.1.12.5.7.2.11.1.6mscLpDS3ImaTestDataStartDelayNortel-MsCarrier-MscPassport-ImaMIB