All MIBs › Nortel-MsCarrier-MscPassport-GsmIwfMIB › mscGsmCsLpAssignedCapacity
mscGsmCsLpAssignedCapacity
Module: Nortel-MsCarrier-MscPassport-GsmIwfMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-GsmIwfMIB::mscGsmCsLpAssignedCapacity
OID (numeric): 1.3.6.1.4.1.562.36.2.1.127.7.10.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute indicates what percentage (0 to 100%) of a given LogicalProcessor has been reserved for the data calls which are currently active. When the assignedCapacity reaches 100%, no new calls are established on the given LogicalProcessor. During the life of a call, the compute requirements will vary. The compute capacity required for a given call type depends on the type of call established including such factors as connection type, data compression, user rate, error correction, flow control; therefore, at call establishment the compute capacity is added to the assignedCapacity for a LogicalProcessor. When the call is released, it's compute capacity is subtracted from the assigned capacity for the Lp.The GsmIwfCallServer uses this information to balance the distribution of data calls across the logical processors.
What is mscGsmCsLpAssignedCapacity?
Read-only percentage (0..100) of this Logical Processor's compute capacity currently committed to active calls; at 100% no new calls are placed on it, and the GsmIwfCallServer uses this figure to load-balance data calls across its logical processors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.127.7.10.1.3 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-GsmIwfMIB::mscGsmCsLpAssignedCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.127.7.10.1.3.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-GsmIwfMIB::mscGsmCsLpAssignedCapacity.1
Start monitoring Nortel Passport/MscCarrier WAN switch (GSM interworking function) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-GsmIwfMIB::mscGsmCsLpAssignedCapacity OID value, configure state conditions and alerts, and monitor any Nortel Passport/MscCarrier WAN switch (GSM interworking function) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.127 | mscGsmCs | Nortel-MsCarrier-MscPassport-GsmIwfMIB |
| 1.3.6.1.4.1.562.36.2.1.127.7 | mscGsmCsLp | Nortel-MsCarrier-MscPassport-GsmIwfMIB |
| 1.3.6.1.4.1.562.36.2.1.127.7.10 | mscGsmCsLpOperTable | Nortel-MsCarrier-MscPassport-GsmIwfMIB |
| 1.3.6.1.4.1.562.36.2.1.127.7.10.1 | mscGsmCsLpOperEntry | Nortel-MsCarrier-MscPassport-GsmIwfMIB |
| 1.3.6.1.4.1.562.36.2.1.127.7.10.1.3 | mscGsmCsLpAssignedCapacity | Nortel-MsCarrier-MscPassport-GsmIwfMIB |