Nortel-MsCarrier-MscPassport-GsmIwfMIB :: mscGsmBcMipState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-GsmIwfMIB › mscGsmBcMipState

mscGsmBcMipState

Module: Nortel-MsCarrier-MscPassport-GsmIwfMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-GsmIwfMIB::mscGsmBcMipState

OID (numeric): 1.3.6.1.4.1.562.36.2.1.128.101.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the current state of the MSC/IWF Interface Protocol (MIP) for an IWF element. Valid values are: idle, Startup state of IWF element. pendingSetup, Pending initial state of IWF element. setup, Initial state of IWF element. pendingActivation, Synchronization has been requested, but the IWF element is not yet in the Synchronization state. activated, Synchronization state. holdDisconnect, Flush buffer state, during call clearing the MSC is responsible for holding the network connection towards the disconnected party while the IWF completes the data transmission (flushing any buffered data towards the disconnected party; any buffered data towards the disconnecting party is discarded.) currentlySuspended, The call is temporarily switched to speech phase during a dual services call.

What is mscGsmBcMipState?

Read-only MSC/IWF Interface Protocol state -- idle/pendingSetup/setup/pendingActivation/activated/holdDisconnect/suspended, default idle -- for this bearer channel; holdDisconnect specifically means the MSC is holding the network connection open while the IWF flushes buffered data during call clearing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.128.101.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-GsmIwfMIB::mscGsmBcMipState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.128.101.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-GsmIwfMIB::mscGsmBcMipState.1

Start monitoring Nortel Passport/MscCarrier WAN switch (GSM interworking function) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-GsmIwfMIB::mscGsmBcMipState OID value, configure state conditions and alerts, and monitor any Nortel Passport/MscCarrier WAN switch (GSM interworking function) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.128mscGsmBcNortel-MsCarrier-MscPassport-GsmIwfMIB
1.3.6.1.4.1.562.36.2.1.128.101mscGsmBcOperTableNortel-MsCarrier-MscPassport-GsmIwfMIB
1.3.6.1.4.1.562.36.2.1.128.101.1mscGsmBcOperEntryNortel-MsCarrier-MscPassport-GsmIwfMIB
1.3.6.1.4.1.562.36.2.1.128.101.1.1mscGsmBcMipStateNortel-MsCarrier-MscPassport-GsmIwfMIB