Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB :: mscFrNniTraceReceiverName

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB › mscFrNniTraceReceiverName

mscFrNniTraceReceiverName

Module: Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceReceiverName

OID (numeric): 1.3.6.1.4.1.562.36.2.1.70.7.10.1.2

Node type: OBJECT-TYPE

Type: AsciiString

Access: read-write

Description: This attribute should be set to the name of the desired trace receiver before starting a trace session. All available trace receivers are listed under the Trace Rcvr/ component. This attribute cannot be set while a trace is active.

What is mscFrNniTraceReceiverName?

Holds the name of the trace receiver that captured Frame Relay NNI trace data should be sent to, selected from the receivers listed under the Trace Rcvr component. Admins set this before starting a trace session to direct the captured frames to the desired destination; it cannot be changed while a trace is active. Setting it to a receiver name like 'RCVR1' routes traced frames to that specific receiver instance.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.70.7.10.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceReceiverName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.70.7.10.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceReceiverName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.70.7.10.1.2.1 s <value>

Start monitoring Nortel Passport/MscCarrier WAN switch (Frame Relay NNI diagnostic trace) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceReceiverName OID value, configure state conditions and alerts, and monitor any Nortel Passport/MscCarrier WAN switch (Frame Relay NNI diagnostic trace) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.70mscFrNniNortel-MsCarrier-MscPassport-FrameRelayNniMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.70.7mscFrNniTraceNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.36.2.1.70.7.10mscFrNniTraceOperationalTableNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.36.2.1.70.7.10.1mscFrNniTraceOperationalEntryNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.36.2.1.70.7.10.1.2mscFrNniTraceReceiverNameNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB