Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB :: mscFrNniTraceQueueLimit

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB › mscFrNniTraceQueueLimit

mscFrNniTraceQueueLimit

Module: Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceQueueLimit

OID (numeric): 1.3.6.1.4.1.562.36.2.1.70.7.10.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the total number of bytes of traced data which may be queued for transmission to the trace receiver. When this limit is exceeded, incoming traced frames are discarded. This attribute can be set while a trace is active and takes effect immediately.

What is mscFrNniTraceQueueLimit?

Sets the total number of bytes of traced data that may be queued for transmission to the trace receiver before incoming traced frames start being discarded. Unlike duration, this value can be changed while a trace is active and takes effect immediately, letting an admin react to a receiver that's falling behind. Raising this from the default of 20 to a higher value would reduce dropped trace data when the receiver link is temporarily slow.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.70.7.10.1.4
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceQueueLimit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.70.7.10.1.4.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceQueueLimit.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.70.7.10.1.4.1 i <value>

Start monitoring Nortel Passport/MscCarrier WAN switch (Frame Relay NNI diagnostic trace) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceQueueLimit OID value, configure state conditions and alerts, and monitor any Nortel Passport/MscCarrier WAN switch (Frame Relay NNI diagnostic trace) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.70mscFrNniNortel-MsCarrier-MscPassport-FrameRelayNniMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.70.7mscFrNniTraceNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.36.2.1.70.7.10mscFrNniTraceOperationalTableNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.36.2.1.70.7.10.1mscFrNniTraceOperationalEntryNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.36.2.1.70.7.10.1.4mscFrNniTraceQueueLimitNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB