Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB :: mscFrNniTraceFilterTracedLength

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB › mscFrNniTraceFilterTracedLength

mscFrNniTraceFilterTracedLength

Module: Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceFilterTracedLength

OID (numeric): 1.3.6.1.4.1.562.36.2.1.70.7.2.10.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the maximum number of bytes to trace per frame starting from the byte following the frame flag. If the frame length is longer than the value specified by this attribute, then the traced frame is truncated. This attribute can be set while a trace is active and takes effect immediately.

What is mscFrNniTraceFilterTracedLength?

Specifies the maximum number of bytes to trace per frame, counted from the byte following the frame flag; longer frames are truncated in the captured trace. Admins lower this value to reduce the volume of trace data collected per frame when only header information is needed. The default of 2000 captures essentially entire frames, but setting it to 64 would capture only frame headers for a lighter-weight trace.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.70.7.2.10.1.4
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceFilterTracedLength

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.70.7.2.10.1.4.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceFilterTracedLength.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.70.7.2.10.1.4.1 i <value>

Start monitoring Nortel Passport/MscCarrier WAN switch (Frame Relay NNI diagnostic trace) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB::mscFrNniTraceFilterTracedLength OID value, configure state conditions and alerts, and monitor any Nortel Passport/MscCarrier WAN switch (Frame Relay NNI diagnostic trace) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.70mscFrNniNortel-MsCarrier-MscPassport-FrameRelayNniMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.70.7mscFrNniTraceNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.36.2.1.70.7.2mscFrNniTraceFilterNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.36.2.1.70.7.2.10mscFrNniTraceFilterOperationalTableNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.36.2.1.70.7.2.10.1mscFrNniTraceFilterOperationalEntryNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB
1.3.6.1.4.1.562.36.2.1.70.7.2.10.1.4mscFrNniTraceFilterTracedLengthNortel-MsCarrier-MscPassport-FrameRelayNniTraceMIB