All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayNniMIB › mscFrNniDlciDcDataPath
mscFrNniDlciDcDataPath
Module: Nortel-MsCarrier-MscPassport-FrameRelayNniMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayNniMIB::mscFrNniDlciDcDataPath
OID (numeric): 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in the Dna component is overridden by this attribute if the value is not useDnaValue.
This value applies to the connection after data transfer state is reached. All the data and control traffic will be sent using this data path. If the provisioned dataPath is not available the connection is not established.
The value of the dataPath is signalled by both ends of the connection. If this value is not the same at both ends dprsOnly is used for the duration of the connection.
A virtual circuit connection is always established using dprsOnly even if this attribute is provisioned as some other value.
dprsOnly - The dynamic packet routing system is used.
dprsMcsOnly - The DPRS Multi-Service Cut-Through Switching path is used.
dprsMcsFirst - The DPRS Multi-Service Cut-Through Switching path is used if it is available. If it is not available, dprsOnly is used.
useDnaValue - The routing system used is based on the value provisioned in the Dna component.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.12 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayNniMIB::mscFrNniDlciDcDataPath
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.12.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayNniMIB::mscFrNniDlciDcDataPath.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.12.1 i <value>
Start monitoring Nortel MsCarrier MscPassport switch (Frame Relay NNI links) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayNniMIB::mscFrNniDlciDcDataPath OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (Frame Relay NNI links) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.70 | mscFrNni | Nortel-MsCarrier-MscPassport-FrameRelayNniMIB |
| 1.3.6.1.4.1.562.36.2.1.70.5 | mscFrNniDlci | Nortel-MsCarrier-MscPassport-FrameRelayNniMIB |
| 1.3.6.1.4.1.562.36.2.1.70.5.2 | mscFrNniDlciDc | Nortel-MsCarrier-MscPassport-FrameRelayNniMIB |
| 1.3.6.1.4.1.562.36.2.1.70.5.2.10 | mscFrNniDlciDcOptionsTable | Nortel-MsCarrier-MscPassport-FrameRelayNniMIB |
| 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1 | mscFrNniDlciDcOptionsEntry | Nortel-MsCarrier-MscPassport-FrameRelayNniMIB |
| 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.12 | mscFrNniDlciDcDataPath | Nortel-MsCarrier-MscPassport-FrameRelayNniMIB |