Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB :: mscFrMuxLmiProtocolStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB › mscFrMuxLmiProtocolStatus

mscFrMuxLmiProtocolStatus

Module: Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiProtocolStatus

OID (numeric): 1.3.6.1.4.1.562.36.2.1.112.3.12.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates whether the Lmi is in an error condition or whether the protocol is behaving normally. When operating with no LMI protocol (procedures = none), this attribute will always be set to normalCondition. When operating with an LMI protocol (procedures set to one of venforForum, ansi, ccitt), this attribute is set to errorCondition when errorEventThreshold of the last eventCount events are in error. The error condition is cleared when eventCount consecutive good events take place. The consequence of an error condition is that all Dlci's on this interface become disabled and there is no data flow in either direction.

What is mscFrMuxLmiProtocolStatus?

Whether the Local Management Interface is behaving normally (normalCondition) or is in an error condition; an errorCondition here means all DLCIs on this interface are disabled and no data can flow until enough consecutive good LMI exchanges clear it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.112.3.12.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiProtocolStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.112.3.12.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiProtocolStatus.1

Start monitoring Nortel Networks MscPassport carrier switching platform (Frame Relay multiplexer/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiProtocolStatus OID value, configure state conditions and alerts, and monitor any Nortel Networks MscPassport carrier switching platform (Frame Relay multiplexer/DLCI) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.112mscFrMuxNortel-MsCarrier-MscPassport-FrameRelayMuxMIB
1.3.6.1.4.1.562.36.2.1.112.3mscFrMuxLmiNortel-MsCarrier-MscPassport-FrameRelayMuxMIB
1.3.6.1.4.1.562.36.2.1.112.3.12mscFrMuxLmiPsiTableNortel-MsCarrier-MscPassport-FrameRelayMuxMIB
1.3.6.1.4.1.562.36.2.1.112.3.12.1mscFrMuxLmiPsiEntryNortel-MsCarrier-MscPassport-FrameRelayMuxMIB
1.3.6.1.4.1.562.36.2.1.112.3.12.1.1mscFrMuxLmiProtocolStatusNortel-MsCarrier-MscPassport-FrameRelayMuxMIB