All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB › mscFrMuxLmiProcedures
mscFrMuxLmiProcedures
Module: Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiProcedures
OID (numeric): 1.3.6.1.4.1.562.36.2.1.112.3.10.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures: none : No Local Management Interface procedure is active. vendorForum : Local Management Interface procedure according to the Vendor Forum specification is active. DLCI 1023 is used for the LMI protocol. ansi: Local Management Interface procedure according to the ANSI specification is active. DLCI 0 is used for the LMI protocol. ccitt: Local Management Interface procedure according to the CCITT specification is active. DLCI 0 is used for the LMI protocol.
What is mscFrMuxLmiProcedures?
Selects which Frame Relay Local Management Interface signaling standard is used on this link — none, vendorForum (DLCI 1023), ansi, or ccitt (the default, DLCI 0) — both ends of the Frame Relay circuit must agree on this setting or LMI status polling will fail.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.112.3.10.1.1 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiProcedures
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.112.3.10.1.1.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiProcedures.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.112.3.10.1.1.1 i <value>
Start monitoring Nortel Networks MscPassport carrier switching platform (Frame Relay multiplexer/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiProcedures OID value, configure state conditions and alerts, and monitor any Nortel Networks MscPassport carrier switching platform (Frame Relay multiplexer/DLCI) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.112 | mscFrMux | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.3 | mscFrMuxLmi | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.3.10 | mscFrMuxLmiProvTable | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.3.10.1 | mscFrMuxLmiProvEntry | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.3.10.1.1 | mscFrMuxLmiProcedures | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |