Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB :: mscFrMuxLmiLinkVerificationTimer

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB › mscFrMuxLmiLinkVerificationTimer

mscFrMuxLmiLinkVerificationTimer

Module: Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiLinkVerificationTimer

OID (numeric): 1.3.6.1.4.1.562.36.2.1.112.3.10.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the time interval (in seconds) at which the FrMux sends Status Enquiry messages to the interface. Exchange of Status Enquiry and Status Report messages constitutes a polling cycle, so this attribute may also be interpreted as time interval at which the FrMux initiates polling cycles. It must be less than checkPointTimer (t392) configured at the other end of the Frame Relay interface.

This attribute corresponds to t391 of the ANSI and CCITT specifications, and nT1 of the Vendor Forum specification.

What is mscFrMuxLmiLinkVerificationTimer?

How often, in seconds (5-30, default 10), this device sends LMI Status Enquiry polls to the interface; it corresponds to the standard T391 timer and must be set shorter than the peer's T392 checkpoint timer or polling cycles will desync.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.112.3.10.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiLinkVerificationTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.112.3.10.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiLinkVerificationTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.112.3.10.1.2.1 i <value>

Start monitoring Nortel Networks MscPassport carrier switching platform (Frame Relay multiplexer/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiLinkVerificationTimer OID value, configure state conditions and alerts, and monitor any Nortel Networks MscPassport carrier switching platform (Frame Relay multiplexer/DLCI) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.112mscFrMuxNortel-MsCarrier-MscPassport-FrameRelayMuxMIB
1.3.6.1.4.1.562.36.2.1.112.3mscFrMuxLmiNortel-MsCarrier-MscPassport-FrameRelayMuxMIB
1.3.6.1.4.1.562.36.2.1.112.3.10mscFrMuxLmiProvTableNortel-MsCarrier-MscPassport-FrameRelayMuxMIB
1.3.6.1.4.1.562.36.2.1.112.3.10.1mscFrMuxLmiProvEntryNortel-MsCarrier-MscPassport-FrameRelayMuxMIB
1.3.6.1.4.1.562.36.2.1.112.3.10.1.2mscFrMuxLmiLinkVerificationTimerNortel-MsCarrier-MscPassport-FrameRelayMuxMIB