All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB › mscFrMuxLmiErrorEventThreshold
mscFrMuxLmiErrorEventThreshold
Module: Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiErrorEventThreshold
OID (numeric): 1.3.6.1.4.1.562.36.2.1.112.3.10.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the number of error events which, if they occur within eventCount events, will cause a protocol error condition (protocolStatus = errorCondition). The error condition is cleared after eventCount sequential correct events occur (protocolStatus = normalCondition).
An event is one of the following: (1) expiry of the linkVerificationTimer (t391), (2) reception of a STATUS message. An error event is one of the following: (1)non-receipt of the STATUS message in t391 seconds, (2)invalid STATUS message, (3) invalid sequence number.
This attribute corresponds to n392 of the ANSI and CCITT specifications and nN2 of the Vendor Forum Specification.
This attribute must be less than or equal to eventCount.
What is mscFrMuxLmiErrorEventThreshold?
How many LMI error events within the last mscFrMuxLmiEventCount events trigger an LMI error condition (all DLCIs on the link then go down), default 3 — corresponds to the standard N392 parameter and must stay less than or equal to mscFrMuxLmiEventCount.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.112.3.10.1.4 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiErrorEventThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.112.3.10.1.4.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiErrorEventThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.112.3.10.1.4.1 i <value>
Start monitoring Nortel Networks MscPassport carrier switching platform (Frame Relay multiplexer/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxLmiErrorEventThreshold OID value, configure state conditions and alerts, and monitor any Nortel Networks MscPassport carrier switching platform (Frame Relay multiplexer/DLCI) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.112 | mscFrMux | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.3 | mscFrMuxLmi | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.3.10 | mscFrMuxLmiProvTable | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.3.10.1 | mscFrMuxLmiProvEntry | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.3.10.1.4 | mscFrMuxLmiErrorEventThreshold | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |