All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB › mscFrMuxFramerDataInversion
mscFrMuxFramerDataInversion
Module: Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxFramerDataInversion
OID (numeric): 1.3.6.1.4.1.562.36.2.1.112.2.11.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute determines whether data bits are to be inverted (1 to 0 and 0 to 1) before transmission of frames to the interface. If the value of this attribute is On, the incoming data bits will also be inverted when frames are received from the link before being processed.
This option is typically used in hdlc framing mode when inversion is used to guarantee 1's density.
Note that aborts (in hdlc and interrupting modes) are corrupted when data is inverted.
This attribute may only take its default value for non-MSA cards.
What is mscFrMuxFramerDataInversion?
Turns on bit inversion of data sent to and received from the link, off by default — typically enabled in HDLC framing mode to guarantee enough 1's density on the wire for clock recovery; note that enabling it corrupts abort-sequence detection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.112.2.11.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxFramerDataInversion
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.112.2.11.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxFramerDataInversion.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.112.2.11.1.2.1 i <value>
Start monitoring Nortel Networks MscPassport carrier switching platform (Frame Relay multiplexer/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB::mscFrMuxFramerDataInversion OID value, configure state conditions and alerts, and monitor any Nortel Networks MscPassport carrier switching platform (Frame Relay multiplexer/DLCI) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.112 | mscFrMux | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.2 | mscFrMuxFramer | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.2.11 | mscFrMuxFramerLinkTable | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.2.11.1 | mscFrMuxFramerLinkEntry | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |
| 1.3.6.1.4.1.562.36.2.1.112.2.11.1.2 | mscFrMuxFramerDataInversion | Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB |