Nortel-MsCarrier-MscPassport-FrameRelayEngMIB :: mscLpEngFrsRowStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayEngMIB › mscLpEngFrsRowStatus

mscLpEngFrsRowStatus

Module: Nortel-MsCarrier-MscPassport-FrameRelayEngMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayEngMIB::mscLpEngFrsRowStatus

OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.23.3.1.1.1

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-write

Description: This variable is used as the basis for SNMP naming of mscLpEngFrs components. These components can be added and deleted.

What is mscLpEngFrsRowStatus?

This read-write RowStatus object is the basis for SNMP naming of mscLpEngFrs components, and per the description it allows these Frame Relay engineering components to be added and deleted. It is the control point a management station uses to instantiate or remove the Frame Relay engineering parameter component for a given logical processor. An admin provisioning Frame Relay support on a new LP would set this object to createAndGo to bring the mscLpEngFrs component into existence.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.23.3.1.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayEngMIB::mscLpEngFrsRowStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.23.3.1.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayEngMIB::mscLpEngFrsRowStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.12.23.3.1.1.1.1 s <value>

Start monitoring Nortel MSC Passport mobile carrier switch / link processor card (Frame Relay engine capacity) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayEngMIB::mscLpEngFrsRowStatus OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch / link processor card (Frame Relay engine capacity) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.12mscLpNortel-MsCarrier-MscPassport-LogicalProcessorMIB
1.3.6.1.4.1.562.36.2.1.12.23mscLpEngNortel-MsCarrier-MscPassport-LogicalProcessorMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.12.23.3mscLpEngFrsNortel-MsCarrier-MscPassport-FrameRelayEngMIB
1.3.6.1.4.1.562.36.2.1.12.23.3.1mscLpEngFrsRowStatusTableNortel-MsCarrier-MscPassport-FrameRelayEngMIB
1.3.6.1.4.1.562.36.2.1.12.23.3.1.1mscLpEngFrsRowStatusEntryNortel-MsCarrier-MscPassport-FrameRelayEngMIB
1.3.6.1.4.1.562.36.2.1.12.23.3.1.1.1mscLpEngFrsRowStatusNortel-MsCarrier-MscPassport-FrameRelayEngMIB