All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayDteMIB › mscFrDteStDlciRateEnforcement
mscFrDteStDlciRateEnforcement
Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteStDlciRateEnforcement
OID (numeric): 1.3.6.1.4.1.562.36.2.1.101.6.10.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component. If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled.
What is mscFrDteStDlciRateEnforcement?
This read-write value turns CIR-based rate enforcement on or off for a statically provisioned DLCI (StDlci): when enabled, traffic that busts through the combined committed and excess burst thresholds is either discarded immediately or, if a Hibernation Queue is provisioned, queued and retried once the circuit has headroom again; setting all three CIR attributes to zero has the same effect as disabling it. An admin enables this to hold a customer or application to its contracted bandwidth, and pairs it with a Hibernation Queue rather than leaving it at the default disabled when bursts should be smoothed rather than dropped outright.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.101.6.10.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteStDlciRateEnforcement
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.101.6.10.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteStDlciRateEnforcement.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.101.6.10.1.2.1 i <value>
Start monitoring Nortel MscPassport multiservice switch (Frame Relay DTE/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteStDlciRateEnforcement OID value, configure state conditions and alerts, and monitor any Nortel MscPassport multiservice switch (Frame Relay DTE/DLCI) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.101 | mscFrDte | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.6 | mscFrDteStDlci | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.6.10 | mscFrDteStDlciProvTable | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.6.10.1 | mscFrDteStDlciProvEntry | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.6.10.1.2 | mscFrDteStDlciRateEnforcement | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |