All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayDteMIB › mscFrDteStDlciExcessBurstAction
mscFrDteStDlciExcessBurstAction
Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteStDlciExcessBurstAction
OID (numeric): 1.3.6.1.4.1.562.36.2.1.101.6.10.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the action taken when the committedBurst size has been exceeded on the DLCI but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken.
What is mscFrDteStDlciExcessBurstAction?
This read-write value picks what happens when a statically provisioned DLCI (StDlci) exceeds its committed burst but stays within its excess burst: setDeBit marks the Discard Eligibility bit in the Frame Relay header (asking the carrier's network to drop it first under congestion, rather than an interior device dropping it outright), while none (the default) takes no special action. An admin sets this to setDeBit to cooperate with the carrier's own congestion handling instead of relying solely on local discard behavior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.101.6.10.1.6 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteStDlciExcessBurstAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.101.6.10.1.6.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteStDlciExcessBurstAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.101.6.10.1.6.1 i <value>
Start monitoring Nortel MscPassport multiservice switch (Frame Relay DTE/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteStDlciExcessBurstAction OID value, configure state conditions and alerts, and monitor any Nortel MscPassport multiservice switch (Frame Relay DTE/DLCI) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.101 | mscFrDte | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.6 | mscFrDteStDlci | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.6.10 | mscFrDteStDlciProvTable | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.6.10.1 | mscFrDteStDlciProvEntry | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.6.10.1.6 | mscFrDteStDlciExcessBurstAction | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |