Nortel-MsCarrier-MscPassport-FrameRelayDteMIB :: mscFrDteRgIfAdminStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayDteMIB › mscFrDteRgIfAdminStatus

mscFrDteRgIfAdminStatus

Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteRgIfAdminStatus

OID (numeric): 1.3.6.1.4.1.562.36.2.1.101.4.10.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.

What is mscFrDteRgIfAdminStatus?

This read-write value sets the desired administrative state of a Remote Group sub-component grouping DLCIs that share a next-hop protocol port at the interface level: up brings the interface into service, down administratively shuts it off, and testing takes packets out of the forwarding path for loopback/diagnostic use. An admin sets this to down before physically removing or re-cabling a circuit, then back to up (its default) to restore service.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.101.4.10.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteRgIfAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.101.4.10.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteRgIfAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.101.4.10.1.1.1 i <value>

Start monitoring Nortel MscPassport multiservice switch (Frame Relay DTE/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteRgIfAdminStatus OID value, configure state conditions and alerts, and monitor any Nortel MscPassport multiservice switch (Frame Relay DTE/DLCI) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.101mscFrDteNortel-MsCarrier-MscPassport-FrameRelayDteMIB
1.3.6.1.4.1.562.36.2.1.101.4mscFrDteRgNortel-MsCarrier-MscPassport-FrameRelayDteMIB
1.3.6.1.4.1.562.36.2.1.101.4.10mscFrDteRgIfEntryTableNortel-MsCarrier-MscPassport-FrameRelayDteMIB
1.3.6.1.4.1.562.36.2.1.101.4.10.1mscFrDteRgIfEntryEntryNortel-MsCarrier-MscPassport-FrameRelayDteMIB
1.3.6.1.4.1.562.36.2.1.101.4.10.1.1mscFrDteRgIfAdminStatusNortel-MsCarrier-MscPassport-FrameRelayDteMIB