All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayDteMIB › mscFrDteLmiProcedures
mscFrDteLmiProcedures
Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteLmiProcedures
OID (numeric): 1.3.6.1.4.1.562.36.2.1.101.3.10.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute selects the Local Management Interface (LMI) protocol to be used on the interface. This attribute is equivalent to the SNMP variable frDlcmiState. The vendorForum LMI protocol automatically implies that the DLCI used by the protocol is 1023. The ansi (T1.617 Annex D) and ccitt (Q.933 Annex A) LMI protocols use DLCI 0. If none is selected, no LMI procedures will run on the interface.
What is mscFrDteLmiProcedures?
This read-write value selects which Local Management Interface (LMI) signalling protocol runs on the Frame Relay access circuit: none disables LMI entirely, vendorForum (the original Gang-of-Four spec) implies DLCI 1023, while ansi (T1.617 Annex D) and ccitt (Q.933 Annex A, the default) both use DLCI 0. An admin sets this to match whatever LMI dialect the carrier's Frame Relay switch expects; a mismatch here is one of the most common reasons an otherwise healthy physical circuit never brings its DLCIs up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.101.3.10.1.1 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteLmiProcedures
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.101.3.10.1.1.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteLmiProcedures.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.101.3.10.1.1.1 i <value>
Start monitoring Nortel MscPassport multiservice switch (Frame Relay DTE/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteLmiProcedures OID value, configure state conditions and alerts, and monitor any Nortel MscPassport multiservice switch (Frame Relay DTE/DLCI) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.101 | mscFrDte | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.3 | mscFrDteLmi | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.3.10 | mscFrDteLmiProvTable | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.3.10.1 | mscFrDteLmiProvEntry | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |
| 1.3.6.1.4.1.562.36.2.1.101.3.10.1.1 | mscFrDteLmiProcedures | Nortel-MsCarrier-MscPassport-FrameRelayDteMIB |