Nortel-MsCarrier-MscPassport-FrameRelayDteMIB :: mscFrDteLmiLmiStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayDteMIB › mscFrDteLmiLmiStatus

mscFrDteLmiLmiStatus

Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteLmiLmiStatus

OID (numeric): 1.3.6.1.4.1.562.36.2.1.101.3.11.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This indicates the status of the Frame Relay interface as determined by the performance of the link management interface (LMI). If no LMI is running, lmiStatus will stay in the running state indefinitely.

What is mscFrDteLmiLmiStatus?

This read-only enumeration reports the health of the Local Management Interface (LMI) session on this DTE interface: running means LMI is exchanging status polls normally, fault means the error threshold has been exceeded and LMI considers the link down, and initializing means LMI is still establishing communication with the far end. If no LMI protocol is configured (mscFrDteLmiProcedures set to none) this value stays at running indefinitely, so an admin should check mscFrDteLmiProcedures first before treating a stuck running value as proof the link is healthy.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.101.3.11.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteLmiLmiStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.101.3.11.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteLmiLmiStatus.1

Start monitoring Nortel MscPassport multiservice switch (Frame Relay DTE/DLCI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayDteMIB::mscFrDteLmiLmiStatus OID value, configure state conditions and alerts, and monitor any Nortel MscPassport multiservice switch (Frame Relay DTE/DLCI) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.101mscFrDteNortel-MsCarrier-MscPassport-FrameRelayDteMIB
1.3.6.1.4.1.562.36.2.1.101.3mscFrDteLmiNortel-MsCarrier-MscPassport-FrameRelayDteMIB
1.3.6.1.4.1.562.36.2.1.101.3.11mscFrDteLmiOperTableNortel-MsCarrier-MscPassport-FrameRelayDteMIB
1.3.6.1.4.1.562.36.2.1.101.3.11.1mscFrDteLmiOperEntryNortel-MsCarrier-MscPassport-FrameRelayDteMIB
1.3.6.1.4.1.562.36.2.1.101.3.11.1.2mscFrDteLmiLmiStatusNortel-MsCarrier-MscPassport-FrameRelayDteMIB