Nortel-MsCarrier-MscPassport-AtmCoreMIB :: mscAtmIfVptVpdVptType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-MsCarrier-MscPassport-AtmCoreMIBmscAtmIfVptVpdVptType

mscAtmIfVptVpdVptType

Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVpdVptType

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.9.2.112.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the type of the Vpt.

On CQC-based ATM FPs all Vpts must be basic. Vpts on ATM IP FPs may be of any type.

A value of basic configures one level of traffic management (TM) for the VPT, at the VC level. VCs within the VP are treated like independent VCC connections, and thus, are scheduled the same as other VCs under the AtmIf, with no scheduling done for the VP itself.

A value of standard configures two levels of TM for the VPT, one level for VP TM and one level for VC level TM. VCs within the VP use weighted fair queueing (standard VPT VCC scheduling) to schedule VCs within the VPT, with VCs differentiated as either real-time (CBR, rt-VBR) or non-real-time (nrt-VBR, UBR) connections. The VP itself has a full range of emission scheduling and service category differentiation available between itself and the other connections under the AtmIf.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.2.112.1.10
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVpdVptType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.2.112.1.10.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVpdVptType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.9.2.112.1.10.1 i <value>

Start monitoring Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVpdVptType OID value, configure state conditions and alerts, and monitor any Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9mscAtmIfVptNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9.2mscAtmIfVptVpdNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9.2.112mscAtmIfVptVpdProvTableNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9.2.112.1mscAtmIfVptVpdProvEntryNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9.2.112.1.10mscAtmIfVptVpdVptTypeNortel-MsCarrier-MscPassport-AtmCoreMIB