Nortel-MsCarrier-MscPassport-AtmCoreMIB :: mscAtmIfVptVpdTmTxQueueLimit

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-MsCarrier-MscPassport-AtmCoreMIBmscAtmIfVptVpdTmTxQueueLimit

mscAtmIfVptVpdTmTxQueueLimit

Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVpdTmTxQueueLimit

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.9.2.2.100.1.22

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies an override to the default transmit queue limit for this connection. An value other than sameAsCa may be specified only for ATM IP and 1pOC48SmSrAtm cards. This attribute is not applicable for basic Vpts.

A value of sameAsCa means to use the default common or per-VC transmit queue limit as defined by the CA service category for this connection.

A value from 5 to 63,488 indicates that a specific transmit queue limit is requested which differs from the default which is defined under the CA component for this service category. A specific value is ignored for connections where common queuing is specified for the service category.

For the 1pOC48SmSrAtm card, this attribute is used to set the per VC utilization limit.

The actual transmit queue limit for a connection is visible in the Vcc Tm, Vpc Tm or Vpt txQueueThresholds attribute.

VALUES (

0 = sameAsCa

)

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.2.2.100.1.22
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVpdTmTxQueueLimit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.2.2.100.1.22.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVpdTmTxQueueLimit.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.9.2.2.100.1.22.1 i <value>

Start monitoring Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmCoreMIB::mscAtmIfVptVpdTmTxQueueLimit OID value, configure state conditions and alerts, and monitor any Nortel/Magellan Passport (MscPassport) ATM carrier switch (core ATM fabric) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9mscAtmIfVptNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9.2mscAtmIfVptVpdNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9.2.2mscAtmIfVptVpdTmNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9.2.2.100mscAtmIfVptVpdTmProvTableNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9.2.2.100.1mscAtmIfVptVpdTmProvEntryNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9.2.2.100.1.22mscAtmIfVptVpdTmTxQueueLimitNortel-MsCarrier-MscPassport-AtmCoreMIB